Nothing will ever convince these types.  It would be simple for them to do an 
experiment with a couple of potted plants and whatever transmitter they’re 
afraid of, but if they were into things like facts and data they wouldn’t be 
down this road to begin with.  Facebook and Twitter posts are the only data 
input they want.

 

-Adam

 

 

From: AF <af-boun...@af.afmug.com> On Behalf Of Tim Hardy
Sent: Sunday, April 21, 2024 7:47 PM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Subject: Re: [AFMUG] Killer 900MHz?

 

So, more likely one of these  <https://extension.psu.edu/juniper-diseases> 
https://extension.psu.edu/juniper-diseases - these idiots need to spray their 
plants but it's always easier to blame it on everything else.

 

On Apr 20, 2024, at 3:27 PM, Chuck McCown via AF <af@af.afmug.com 
<mailto:af@af.afmug.com> > wrote:

 

I would go with the vent as the number one suspect.  

 

The antenna is probably pretty isotropic.  You would see more of a graduated 
spherical damage I would think.  

 

From: Ken Hohhof

Sent: Saturday, April 20, 2024 10:42 AM

To: 'AnimalFarm Microwave Users Group'

Subject: Re: [AFMUG] Killer 900MHz?

 

No, although sometimes I wish it could happen, so we could clear out the RF 
path without a chainsaw.

 

I look at the photo and see a vent, some garbage cans, the electrical service 
entrance, some suspicious white stuff on the ground, but it has to be the smart 
meter that is killing the evergreen.  Even though the 900 MHz chip probably 
only transmits when polled.  And it couldn’t possibly be the cold wind or dogs 
peeing on the evergreen or they didn’t water it during a drought.

 

Probably this person posted the photo while holding their phone half an inch 
from their brain.  Remember the viral photo of cellphones making popcorn pop?  
(fake of course)

 

From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf 
Of David Hannum
Sent: Saturday, April 20, 2024 11:17 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com <mailto:af@af.afmug.com> >
Subject: [AFMUG] Killer 900MHz?

 

I know that needles really absorb 900mhz, but could this happen?  I can't see 
it at legal ERIP levels?  What do you engineers say?

 

Dave

 


  _____  


-- 
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
 <mailto:AF@af.afmug.com> AF@af.afmug.com
 <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

 

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to