Tried that too.
I added this route (other routes removed for brevity):
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
169.254.0.0 255.255.0.0 192.168.222.1 192.168.222.116 11
Packets seem to go to the radio, but they don't come back.
Oh, and this is a PTP650 that I'm trying to set up (not a Canopy
radio). Telnet is not turned on by default.
bp
On 9/23/2014 9:16 AM, cstanners--- via Af wrote:
IIRC newer windows versions will not route to a 169.254 IP that is outside your local
network - if I need to access a SM on that IP that is behind a router, I need to do as
administrator "route add 169.254.1.0 mask 255.255.255.0 put.routers.ip.here"
------Original Message------
From: Bill Prince via Af
Sender: Af
To: Motorola III
ReplyTo: af@afmug.com
Subject: [AFMUG] routing to/from 169.254.0.0
Sent: Sep 23, 2014 10:58 AM
Is there a way to route to/from a Cambium radio that is on the default
IP (169.254.1.1) through a Mikrotik? I think the issue is that the
default configuration does not have a gateway. So it doesn't know the
way back.
I put the interface on the MT on 169.254.1.3/16, but don't get replies
unless I go directly from the MT.
