http://exchange.nagios.org/directory/Plugins/Hardware/UPS/APC/check_apc-2Epl/details
In order to show output load in watts, the maximum power load
wattage must be included in the check. This can be found on your UPS
management page under the UPS tab and then About using the real
power ratting shown.
Crazy detail here:
http://www.apcmedia.com/salestools/SADE-5TNQYF/SADE-5TNQYF_R1_EN.pdf
ryan
On 10/28/14 7:31 AM, Adam Moffett via Af wrote:
This is the first time I've ever taken a very close look at the
management page on one of the APC's here. I had been thinking they
were somebody else's problem.
Why do I see "Load in Watts" with a value of 10.4%? My first thought
was maybe the % was a typo, but 10.4 watts sounds too low. Second
thought was maybe it's 10.4% of 1500VA....but that sounds too high.
No matter what it makes no sense. Anybody know what I'm supposed to
learn by reading this? (other than the programmer failed English)
--
D. Ryan Spott | Iron Goat Networks, llc
broadband | telco | colo | community
PO Box 1232 / 603 W. Stevens Sultan, WA 98284
360-799-0552 | gtalk: rsp...@irongoat.net