we replaced the radio, it resolved the issue
On Tue, Nov 18, 2014 at 5:15 PM, timothy steele via Af <af@afmug.com> wrote: > Your leaving a lot of info out.. > > What antenna are you using? > What radio are you using? > What speeds are you expecting to see > What type of cable did you use > Did you test the BH > Did you test the cable on AP and BH > Did you test switch ports the AP and BH are plugged into? > > — > Sent from Mailbox <https://www.dropbox.com/mailbox> > > > On Tue, Nov 18, 2014 at 4:43 PM, Josh Reynolds via Af <af@afmug.com> > wrote: > >> #!/sbin/cgi >> <? >> include("lib/settings.inc"); >> >> if ($action!="test") { >> if ($feature_poe_passthrough == 1) { >> if (!isset($poe_test)) { >> $poe_test="on"; >> } >> } >> >> if (!isset($stress_test)) { >> $stress_test="on"; >> } >> } >> >> if (!isset($poe_cnt)) { >> $poe_cnt="10"; >> } >> if (!isset($stress_dur)) { >> $stress_dur="5"; >> } >> >> POE related. There is no temp sensor in UBNT gear. >> >> On 11/18/2014 08:00 AM, That One Guy via Af wrote: >> >> anybody know what this does? >> I have an AP that has 6 clients, 5hz channels, decent links for all, the >> AP is reachable fine, but the clients are all having throughput problems >> and most of the time are inaccessible >> >> Im wondering if the AP hasnt gotten too cold so Ive been trying to force >> it to heat up, running the builtin speedtest to the colocated AP >> >> browsing the /usr/www folder there is the test.cgi and the test2.cgi, >> test2 lets you initiate a stress test, I dont know what that does, but top >> shows the processor in heavy use. I assume this would generate heat. >> Does ubnt have any temp sensor? >> what does this stress test actually do? >> >> I do not want to climb up and replace this AP today, I left my heavy >> pants at home >> >> >> -- >> All parts should go together without forcing. You must remember that >> the parts you are reassembling were disassembled by you. Therefore, if you >> can't get them together again, there must be a reason. By all means, do not >> use a hammer. -- IBM maintenance manual, 1925 >> >> >> -- >> josh reynolds :: chief information officer >> spitwspots :: www.spitwspots.com >> >> > -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
