It “acts” like it has 2dB also , based on field testing, but I could be wrong
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Eric Muehleisen via Af Sent: Tuesday, December 02, 2014 6:02 PM To: af@afmug.com Subject: Re: [AFMUG] epmp - multi site That's on the 5ghz sector. Any ideas on the 2.4 sector? Can't find it listed anywhere. On Tue, Dec 2, 2014 at 3:57 PM, Paul McCall via Af <af@afmug.com<mailto:af@afmug.com>> wrote: I thought I heard it was 2degree downtilt From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of CBB - Jay Fuller via Af Sent: Tuesday, December 02, 2014 11:22 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] epmp - multi site Gotcha. Notice they all came with gps receivers....is there any built in downtilt on the antennas? i assume not.... ----- Original Message ----- From: Josh Luthman via Af<mailto:af@afmug.com> To: af@afmug.com<mailto:af@afmug.com> Sent: Tuesday, December 02, 2014 9:46 AM Subject: Re: [AFMUG] epmp - multi site SyncInjector Gige. Don't forget a sync pipe basic if you want to sync =P All you need is one pair of leads and you can power 4 radios. Very clean and easy. If you don't want to sync, I think the POE injector would work (not certain). You can sync with the GPS antenna, but Forrest will always preach you want one sync source per site and I'm a fan of taking good free advice. Josh Luthman Office: 937-552-2340<tel:937-552-2340> Direct: 937-552-2343<tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Dec 2, 2014 at 10:41 AM, CBB - Jay Fuller via Af <af@afmug.com<mailto:af@afmug.com>> wrote: so wanting to put 3 or 4 of these on a tower. We can use the included power supplies - but would forrest's power injector work? I know these are gigabit enabled radios.... which model injector from forrest?
