I have perl script that programs SM's before they are labeled and go to installers. Between interruptions been fighting issues.
snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.2.1.1.0 s all # Set Channel Scan No response. These also seem to not work. lanMaskSm Object ID: 1.3.6.1.4.1.161.19.3.2.1.4 lanIpSm Object ID: 1.3.6.1.4.1.161.19.3.2.1.3 defaultGwSm Object ID: 1.3.6.1.4.1.161.19.3.2.1.5 On Mon, Dec 8, 2014 at 4:26 PM, Jonathan Mandziara via Af <af@afmug.com> wrote: > Matt, > > Thanks! > > With those steps that you provided, I can see the issue that you are having. > > I will open an issue for this. > > The obvious workaround (until fixed) would be to set the IPv4 Filter after > setting the IPv6 filter in your script. > > Best, > > Jonathan > > -----Original Message----- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af > Sent: Monday, December 08, 2014 2:53 PM > To: af@afmug.com > Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug? > > Further investigation. To repeat it. > > First reset factory defaults to a 3.6 sm running 13.2 then reboot. > Enable SNMP read/write in GUI. > > Then: > > #set IPv4 filter all > snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1 > > #set IPv6 filter all > snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.160.0 i 1 > > The moment you set IPv6 filter it disables the IPv4 filter. After you do > this once you cannot reproduce it without resetting defaults and rebooting > again. Seeing other SNMP issues. Still testing. > > > > > > On Mon, Dec 8, 2014 at 1:51 PM, Jonathan Mandziara via Af <af@afmug.com> > wrote: >> Matt, >> >> We are not able to reproduce your issue. >> >> We have some questions for you. >> Q1) Is your radio's SNMP setting set to R/W? >> Q2) Is the radios' SNMP Community string set to "Canopy"? >> Q3) Is the SNMP filter enabled? >> Q4) Are you rebooting the SM after sending the SNMP OID? >> Q5) Are you trying this to the SM over the SNMP proxy? >> Q6) What is the error that snmpset provides after issuing the command? >> >> Best, >> >> Cambium Jonathan >> >> -----Original Message----- >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af >> Sent: Monday, December 08, 2014 12:01 PM >> To: af@afmug.com >> Subject: [AFMUG] Canopy v13.2 and SNMP Bug? >> >> allIpv4Filter >> Object ID: 1.3.6.1.4.1.161.19.3.3.2.132 >> >> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i >> 1 >> >> Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running >> 13.2 and it does not seem to work. Anyone else see an issue with it? >> Setting the allipv6filter does seem to work. This a bug?