would you care to share your scripts matt? i'd be glad to buy beers or other compensation. our guys have been asking for an easy way to do all this and i've been too busy to build the scripts myself.
-sean On Mon, Dec 8, 2014 at 4:07 PM, Matt via Af <af@afmug.com> wrote: > I have perl script that programs SM's before they are labeled and go > to installers. Between interruptions been fighting issues. > > snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.2.1.1.0 s > all # Set Channel Scan > No response. > > These also seem to not work. > > lanMaskSm > Object ID: 1.3.6.1.4.1.161.19.3.2.1.4 > > lanIpSm > Object ID: 1.3.6.1.4.1.161.19.3.2.1.3 > > defaultGwSm > Object ID: 1.3.6.1.4.1.161.19.3.2.1.5 > > > > > > > On Mon, Dec 8, 2014 at 4:26 PM, Jonathan Mandziara via Af <af@afmug.com> > wrote: > > Matt, > > > > Thanks! > > > > With those steps that you provided, I can see the issue that you are > having. > > > > I will open an issue for this. > > > > The obvious workaround (until fixed) would be to set the IPv4 Filter > after setting the IPv6 filter in your script. > > > > Best, > > > > Jonathan > > > > -----Original Message----- > > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af > > Sent: Monday, December 08, 2014 2:53 PM > > To: af@afmug.com > > Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug? > > > > Further investigation. To repeat it. > > > > First reset factory defaults to a 3.6 sm running 13.2 then reboot. > > Enable SNMP read/write in GUI. > > > > Then: > > > > #set IPv4 filter all > > snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1 > > > > #set IPv6 filter all > > snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.160.0 i 1 > > > > The moment you set IPv6 filter it disables the IPv4 filter. After you > do this once you cannot reproduce it without resetting defaults and > rebooting again. Seeing other SNMP issues. Still testing. > > > > > > > > > > > > On Mon, Dec 8, 2014 at 1:51 PM, Jonathan Mandziara via Af <af@afmug.com> > wrote: > >> Matt, > >> > >> We are not able to reproduce your issue. > >> > >> We have some questions for you. > >> Q1) Is your radio's SNMP setting set to R/W? > >> Q2) Is the radios' SNMP Community string set to "Canopy"? > >> Q3) Is the SNMP filter enabled? > >> Q4) Are you rebooting the SM after sending the SNMP OID? > >> Q5) Are you trying this to the SM over the SNMP proxy? > >> Q6) What is the error that snmpset provides after issuing the command? > >> > >> Best, > >> > >> Cambium Jonathan > >> > >> -----Original Message----- > >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af > >> Sent: Monday, December 08, 2014 12:01 PM > >> To: af@afmug.com > >> Subject: [AFMUG] Canopy v13.2 and SNMP Bug? > >> > >> allIpv4Filter > >> Object ID: 1.3.6.1.4.1.161.19.3.3.2.132 > >> > >> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i > >> 1 > >> > >> Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running > >> 13.2 and it does not seem to work. Anyone else see an issue with it? > >> Setting the allipv6filter does seem to work. This a bug? >
