When you say boom you mean the card would appear damaged? What if you put the card in another situation and just do typical ethernet, would it work?
My problem is one AP doesn't turn on at all, two have ethernet problems (link up/down), one reboots when I hit refresh (seriously) I ordered 12 and from my pictures I can see the middle set says HV in black ink. Unfortunately that means I definitely can't see the ink on the outer two cases so I'll have to climb to see if they're HV for sure. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Dec 9, 2014 at 8:20 PM, George Skorup (Cyber Broadcasting) via Af < af@afmug.com> wrote: > I think all pins or pairs on the non-PoE GigESS's are clamped under 10 > volts. So.. boom? > > Are you sure you didn't get regular 10/100 APC PoE SS's? And that's why > your GigE isn't working? > > I believe the GigESS-HV's are pretty clearly marked/stamped as HV. At > least the ones I have in the PRM24 chassis in the NOC are. Yep, just > looked, the back of the handle is stamped HV. > > > On 12/9/2014 6:49 PM, Josh Luthman via Af wrote: > >> Has anyone plugged one in to see what would happen? Does the card just >> blow as soon as you power it up? >> >> As far as I know, every APC card I've gotten in the last several months >> have been GigEAPC-HV but I'm curious to know what would happen if maybe I >> was shipped the wrong units... >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> > >
