I think what you're running into is the annoying ARP cache on Canopy. If
you're on the same L2 segment, but completely different IP subnet, it
still caches your IP/MAC pair. There's no way, at least that I know, to
clear it, you have to reboot the radio. Telnet in and run 'arp -a' and
you'll see what I mean.
On 12/18/2014 11:32 AM, Dennis Burgess via Af wrote:
So, have had this issue before, with ICMP redirects and Canopy
equipment. Basically a MT by default will send a ICMP redirect, and
the canopy device adds a route into its routing table, regardless if
its correct or not, then can�t access that device from the specific IP
that that redirect was for until I reboot the canopy device clearing
that entry. MT has added the ability NOT to send ICMP redirects, but
once its done, I don�t think of anything but a reboot of the canopy
will fix it..
Any other alternatives to this? Route delete does not work on the
canopy.
Thanks,
DennisBurgessSignature
www.linktechs.net <http://www.linktechs.net> � 314-735-0270 �
dmburg...@linktechs.net <mailto:dmburg...@linktechs.net>
