Trying to get nLOS from 5 gig is where you are doing it wrong.
On Tue, Dec 23, 2014 at 4:28 PM, Alan West via Af <af@afmug.com> wrote: > AP is set: > Transmitter output power 23 > antenna gain 13 > > This is the standard Cambium sector. > > > On Tuesday, December 23, 2014 4:19 PM, Josh Luthman via Af <af@afmug.com> > wrote: > > > I don't think you want to do NLOS in 5 GHz at all. That's why I doubled > up APs and have 2/5 on each sector. > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Dec 23, 2014 5:16 PM, "Brian Sullivan via Af" <af@afmug.com> wrote: > > Is it realistic to expect good performance through trees using 5 GHz? > I could see trying to get a nLOS situation to work at 1 mile, but > certainly not 5+. > Do you have other APs on the tower that you can compare to? > > On 12/23/2014 4:07 PM, Josh Luthman via Af wrote: > > Uhm my post detailed a 5.1 link at 7 miles? Got -67 and some very nice > bandwidth bumps. > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Dec 23, 2014 4:58 PM, "Alan West via Af" <af@afmug.com> wrote: > > Yah, my AP is not showing up there at all. But the refresh seems > dreadfully slow on these. I have it set to 2 seconds. I only have the upper > band from 5740-58xx checked. > > Are you successfully getting any kind of range with the 110s? > > > > > On Tuesday, December 23, 2014 3:54 PM, Josh Luthman via Af < > af@afmug.com> wrote: > > > Go to monitor wireless. That's all the APs it can see with the > frequencies/sizes you've enabled. > I would suggest limiting the frequencies to the band you're deployed in. > Saves time in scanning. > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Dec 23, 2014 4:49 PM, "Alan West via Af" <af@afmug.com> wrote: > > Hello all. > > I am playing with a EPMP system to try to offload some customers over to > it from my legacy 100 series network. I have a single 120 sector running > 5.7 at about 180ft. Software is 2.3.3. Running on 20mhz channel. > > I have four EPMP Force 110s I am evaluating. I have one of them working > at a customers home at 5.7 miles. Not perfect, but working. > > I cannot get a signal at all at another home very close to the other, at > 5.9 miles. This is going over open farmland, however, it is not line of > site (neither is the one above). There are a couple of small tree lines in > the path. They are not very wide at all, perhaps only one or two trees > deep. Each is along a creek. > > Is anyone else having issues with these? Maybe I have something > configured wrong. > > > > > > >