Anything earlier than 12.1 needs to be updated to 12.1 first. Then I would read the 430 to 450 migration notes in the 12.2.2 release notes.
I believe you can go directly from 12.1 to 13.2. If you change your mind and want to downgrade, I know you can’t go back to 11.2, I don’t remember if you can go back to 12.1, but you don’t want to be stuck on 12.1 anyway. So once you have the 430/450 interop checkboxes on your 430 SMs, I think you are stuck with them, luckily that whole thing seems to have been well thought out. The problem I ran into was having some 430 SMs with 12.2.2 and wanting to deploy them on a 430 AP still on 11.2, the AP will not be able to display the signal from those SMs, it will show as NA/NA until you update the AP. But you can’t downgrade the SM back to 11.2. From: TJ Trout Sent: Sunday, February 15, 2015 6:02 PM To: [email protected] Subject: Re: [AFMUG] Sm needs to be power cycled after interference? 12.1 That's a lot of release guides to check On Sun, Feb 15, 2015 at 3:46 PM, Josh Luthman <[email protected]> wrote: That's a big jump...I'd check the release guides. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Feb 15, 2015 6:46 PM, "TJ Trout" <[email protected]> wrote: Can i go 12.1-13.2.1? or do I need to update in steps? On Sun, Feb 15, 2015 at 11:36 AM, Bill Prince <[email protected]> wrote: Update to 13.2 or 13.2.1. There are circumstances where an SM will lose connectivity, and the later SW handles this better. bp <part15sbs{at}gmail{dot}com> On 2/15/2015 10:45 AM, TJ Trout wrote: I have a 430 site that has been getting interference lately, when the interference happens some SM's drop off of the Sector and then they won't reconnect until the customer power cycles their SM, this is on 12.1, is this a known problem? Really annoying
