Hey, where qq On Monday, February 16, 2015, Jason McKemie < [email protected]> wrote:
> > > On Monday, February 16, 2015, Jason McKemie < > [email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');>> wrote: > >> >> >> On Sunday, February 15, 2015, Ken Hohhof <[email protected]> wrote: >> >>> Anything earlier than 12.1 needs to be updated to 12.1 first. >>> >>> Then I would read the 430 to 450 migration notes in the 12.2.2 release >>> notes. >>> >>> I believe you can go directly from 12.1 to 13.2. If you change your >>> mind and want to downgrade, I know you can’t go back to 11.2, I don’t >>> remember if you can go back to 12.1, but you don’t want to be stuck on 12.1 >>> anyway. So once you have the 430/450 interop checkboxes on your 430 SMs, I >>> think you are stuck with them, luckily that whole thing seems to have been >>> well thought out. The problem I ran into was having some 430 SMs with >>> 12.2.2 and wanting to deploy them on a 430 AP still on 11.2, the AP will >>> not be able to display the signal from those SMs, it will show as NA/NA >>> until you update the AP. But you can’t downgrade the SM back to 11.2. >>> >>> >>> *From:* TJ Trout >>> *Sent:* Sunday, February 15, 2015 6:02 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] Sm needs to be power cycled after interference? >>> 12.1 >>> >>> That's a lot of release guides to check >>> >>> On Sun, Feb 15, 2015 at 3:46 PM, Josh Luthman < >>> [email protected]> wrote: >>> >>>> That's a big jump...I'd check the release guides. >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> On Feb 15, 2015 6:46 PM, "TJ Trout" <[email protected]> wrote: >>>> >>>>> Can i go 12.1-13.2.1? or do I need to update in steps? >>>>> >>>>> On Sun, Feb 15, 2015 at 11:36 AM, Bill Prince <[email protected]> >>>>> wrote: >>>>> >>>>>> Update to 13.2 or 13.2.1. There are circumstances where an SM will >>>>>> lose connectivity, and the later SW handles this better. >>>>>> >>>>>> bp >>>>>> <part15sbs{at}gmail{dot}com> >>>>>> >>>>>> >>>>>> On 2/15/2015 10:45 AM, TJ Trout wrote: >>>>>> >>>>>>> I have a 430 site that has been getting interference lately, when >>>>>>> the interference happens some SM's drop off of the Sector and then they >>>>>>> won't reconnect until the customer power cycles their SM, this is on >>>>>>> 12.1, >>>>>>> is this a known problem? Really annoying >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >>
