The problem is my bite. That last thing I'll fret over are scars to my hide.
On Thu, Feb 19, 2015 at 3:26 PM, Daniel White <afmu...@gmail.com> wrote: > They don’t bite too hard over here Patrick… too hard :-) > > > > *************************************************************************** > > Daniel White - Managing Director > > SAF North America LLC > > Cell: +1 (303) 746-3590 > > daniel.wh...@saftehnika.com > > Skype: danieldwhite > Social: LinkedIn <http://www.linkedin.com/in/danielwhite84> > > > > *************************************************************************** > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *That One Guy > *Sent:* Thursday, February 19, 2015 11:17 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] There goes the neighborhood, right? > > > > We like vendors on the list. Public floggings are our thing, and sometimes > ballgags, but ken keeps those and decides who gets the gimp suit. > > > > On Thu, Feb 19, 2015 at 12:14 PM, Chuck McCown <ch...@wbmfg.com> wrote: > > Open, cheap and fun! > > > > > > *From:* Patrick Leary <patrickleary.af...@gmail.com> > > *Sent:* Thursday, February 19, 2015 10:49 AM > > *To:* Af@afmug.com > > *Subject:* [AFMUG] There goes the neighborhood, right? > > > > Okay then. > > > > I commit to being a responsible contributor here. I've joined since I've > noticed the archives are populated with a fair number of threads about > Telrad and/or the COMPACT -- and among them many incorrect assumptions. I'm > here to share info, dispel rumor, and take arrows. I will stay out of > threads where I don't belong. > > > > We will also plan on going to Chuck's next Animal Farm. Frankly, I did not > know it was open, instead assuming it'd be uncouth of us to be there. > > > > Cheers, > > > > Patrick > > > > -- > > Patrick Leary > > Director BD, North America, Telrad > > 727.501.3735 > > patrickleary.af...@gmail.com [this address is only for AFMUG] > > pmailto:patrick.le...@telrad.com <patrick.le...@telrad.com> [this is my > corporate address] > > > > > -- > > Patrick Leary > > Director BD, North America, Telrad > > 727.501.3735 > > patrickleary.af...@gmail.com [this address is only for AFMUG] > > pmailto:patrick.le...@telrad.com <patrick.le...@telrad.com> [this is my > corporate address] > > > > > > -- > > All parts should go together without forcing. You must remember that the > parts you are reassembling were disassembled by you. Therefore, if you > can't get them together again, there must be a reason. By all means, do not > use a hammer. -- IBM maintenance manual, 1925 > -- Patrick Leary Director BD, North America, Telrad 727.501.3735 patrickleary.af...@gmail.com [this address is only for AFMUG] patrick.le...@telrad.com <patrick.le...@telrad.com> [this is my corporate address]
