Shouldn't be. Here is a screen shot of the VLAN membership tab one of ours that's configured the same way:
[image: Inline image 1] Management is on VLAN1, and I can get into it fine. This is plugged into a Layer 3 switch at the bottom. On Tue, Mar 24, 2015 at 5:32 PM, Andreas Wiatowski <andr...@silowireless.com > wrote: > We made a mistake today. We are totally routed … so it has been a while > since we did anything VLAN related. > > We have lost management access to the AP. > > We turned VLAN configuration ON > Allow Frames ALL > Dynamic Learning Enabled > Management VID is 1 > > Vlan Membership configuration had a VLAN of 347 ADDED but we think VLAN > 1 was not added. > > Are we screwed? Ap is at 450 ft… into one of those ETHERWAN hardened > switches with a MT router on the bottom. > > > > Cheers, > > Andreas Wiatowski, CEO > Silo Wireless Inc. > 519-449-5656 x-600 > >