We tried this link today Standard KP dish at 150' to a KP sector antenna at 255' on the other end. Got a -79 signal but it would not stay connected and the link quality was miserable. I am going to go back and swap it to a 900 for now but some of you wanted to know how it went. There you go. I thought about a larger dish but dont want that kind of sail at 150' with the wind we have here.
Craig ----- Original Message ----- From: "Brandon Yuchasz" <[email protected]> To: [email protected] Sent: Monday, May 18, 2015 10:55:16 PM Subject: Re: [AFMUG] 15 mile EPMP link 2.4 Craig, I don’t have anything offer in the way of help but if you don't mind reporting back how it went and what size dish you used. I would appreciate it. Right now we are deploying some epmp in 5ghz to fill in some area's but I have been considering doing some in 2.4 in specific areas that are clean enough. One in particular we would want to do a few 10 mile links. Best regards, Brandon Yuchasz GogebicRange.net www.gogebicrange.net -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Craig House Sent: Monday, May 18, 2015 6:57 PM To: [email protected] Subject: [AFMUG] 15 mile EPMP link 2.4 Anyone have an idea what kind of reliability/ signal I might see from a 15 mile EPMP 2.4 link Dished at 150' on a tower to a 90 degree sector at 255' on the other end? I have limited experience with the EPMP stuff but so far it is performing well. We even had a 7 mile shot without a dish for a short time that was -72 but we went ahead and dished it. I am installing this link tomorrow and it is a long drive to the site. I just dont want to have it be a problem after I drive 2 1/2 hours back. It is very remote on the dished end but somewhat in a town on the AP end. I've done FSK for years but the EPMP is pretty new to us. Craig
