http://www.alliedelec.com/phoenix-contact-5602192/70208161/
From: Josh Luthman Sent: Friday, May 22, 2015 9:22 PM To: [email protected] Subject: Re: [AFMUG] NEMA enclosure with GFCI outlet Oh no I definitely do, remember I'm passing these costs to the customer! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, May 22, 2015 at 7:27 PM, Ken Hohhof <[email protected]> wrote: An electrician would consider two GFCI’s in series unprofessional. It does not provide any more protection, and in the even one of them trips, it is likely to cause confusion. That said, there are DIN rail mount GFCI modules with no outlet just the test and reset buttons, you could wire one ahead of the terminal block in the L-Com enclosure. Phoenix Contact makes them, I saw them at Allied for over $100. I assume you don’t want to pay that. From: Josh Luthman Sent: Friday, May 22, 2015 4:46 PM To: [email protected] Subject: Re: [AFMUG] NEMA enclosure with GFCI outlet Right the outlets. Not inside the enclosure (at least mine). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On May 22, 2015 5:43 PM, "Jaime Solorza" <[email protected]> wrote: All outlets here at well sites are GFCI period. So u get used to it. Jaime Solorza On May 22, 2015 2:36 PM, "George Skorup" <[email protected]> wrote: NEC says you need one GFI device on a circuit. So tell them two is not code? :) On 5/22/2015 3:11 PM, Josh Luthman wrote: I'm using that enclosure now. Need to dremel room for a GFCI. I hate them as well. They're doing a breaker, GFCI and that will go to the GFCI in the box. That's what they want, so that's what I'm charging for. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, May 22, 2015 at 3:37 PM, Josh Reynolds <[email protected]> wrote: http://www.l-com.com/productfinder/finderresults.aspx?ftype=ENCLOSURES&finderid=5&steps=14x12x7+Inch%7c120+VAC%7cNone Find one you can adapt, swap the outlet for a GFCI. Josh Reynolds CIO, SPITwSPOTS www.spitwspots.comOn 05/22/2015 11:33 AM, Josh Luthman wrote: Gotta have both (customer requirement). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, May 22, 2015 at 3:32 PM, Adam Moffett <[email protected]> wrote: You could wire your box to the load side of a separate outdoor GFCI. Then the GFCI can also act as a convenience outlet and disconnect switch. Just a thought. On 5/22/2015 3:29 PM, Josh Luthman wrote: Does such a thing exist? My current plan is to take a small box with a normal outlet and replace it, but that requires a bit of dremel work and hence won't look at pretty. I only need a small work space, looking at 14x12x7 right now. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
