Downgrade firmware, or I'm pretty sure you need to drive to the other end (or use a backup link) to change it.
Don't use beta firmware on production links... (I understand using beta firmware is often required to get the cheap Ubiquiti equipment working well, but that's another discussion). On Tue, Jun 2, 2015 at 9:14 AM, That One Guy /sarcasm < [email protected]> wrote: > does anybody know a trick to get a radio set to client that is using > wpa2-tkip to connect to this AP that will only do none, wpa-aes and > wpa2-aes. I dont know why the link was set up tkip, but apparently this > beta firmware wont let you use it > > On Tue, Jun 2, 2015 at 8:58 AM, That One Guy /sarcasm < > [email protected]> wrote: > >> Please select a valid "Wireless Security. Weak wireless security (WEP, >> WPA-TKIP, WPA2-TKIP) is not supported any more" >> >> nice thing to have pop up on a production backhaul that just powercycled. >> im assuming the link didnt come back up on this old link because its not >> transmitting? >> >> -- >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> > > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
