I think Edgar Allen Poe just rolled over in his grave. Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of That One Guy /sarcasm Sent: Tuesday, June 2, 2015 8:07 AM To: af@afmug.com Subject: Re: [AFMUG] WTF UBNT even better, ill be unemployed so I wont be job locked and can pursue my poetry Roses are red Violets are blue Go to hell On Tue, Jun 2, 2015 at 10:04 AM, Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: I don’t think that job at McDonalds is going to be there much longer. They are pretty tired of being asked to pay silly wages for a job that teenagers should be doing again. [kiosk]<http://rightwingnews.com/wp-content/uploads/2015/05/kiosk.jpg> From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of That One Guy /sarcasm Sent: Tuesday, June 2, 2015 7:53 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] WTF UBNT I changed it to WPA2 AES and rebooted it a few times it eventually let the other side connect. Is it backward compatible and I was just too impatient? I dont like running beta, Im not all that fond of running UBNT, but cheap whores are always there when you need them. The problem boils down to poor network management on my part, that WPA tkip should not have been configured on that link, I dont know why it was, I should be fired, so I can go work at mcdonalds, make more money, and get fat too. On Tue, Jun 2, 2015 at 9:48 AM, Jeremy <jeremysmi...@gmail.com<mailto:jeremysmi...@gmail.com>> wrote: The newer production firmwares don't allow it either. WPA2-AES offloads the encryption to a dedicated processor or something like that, so it does not affect the performance of the radio. It seems like that is what I read. We use it on all of our links anyway so it wasn't a change for us. On Tue, Jun 2, 2015 at 8:17 AM, Colin Stanners <cstann...@gmail.com<mailto:cstann...@gmail.com>> wrote: Downgrade firmware, or I'm pretty sure you need to drive to the other end (or use a backup link) to change it. Don't use beta firmware on production links... (I understand using beta firmware is often required to get the cheap Ubiquiti equipment working well, but that's another discussion). On Tue, Jun 2, 2015 at 9:14 AM, That One Guy /sarcasm <thatoneguyst...@gmail.com<mailto:thatoneguyst...@gmail.com>> wrote: does anybody know a trick to get a radio set to client that is using wpa2-tkip to connect to this AP that will only do none, wpa-aes and wpa2-aes. I dont know why the link was set up tkip, but apparently this beta firmware wont let you use it On Tue, Jun 2, 2015 at 8:58 AM, That One Guy /sarcasm <thatoneguyst...@gmail.com<mailto:thatoneguyst...@gmail.com>> wrote: Please select a valid "Wireless Security. Weak wireless security (WEP, WPA-TKIP, WPA2-TKIP) is not supported any more" nice thing to have pop up on a production backhaul that just powercycled. im assuming the link didnt come back up on this old link because its not transmitting? -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team. -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team. -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team. -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
