The link Josh posted to wire the RJ12 to RJ45 jumper will allow you to
use the spare parasitics with SyncInjectors. But I think you need at
least Rev E or possibly Rev F/G/H pipes with the newer SiteMonitor
controlled SyncInjectors. There's some difference, I forget what it is.
I think the no-no was Rev C pipes on Rev H SyncInjectors. Forrest would
have to say for sure what works with what.
On 6/19/2015 12:18 PM, That One Guy /sarcasm wrote:
We have always used the parasitics, syncsplitters, creative taps and
syncbox, but these syncinjectors are the bees knees, other than that
they arent universal. BUT, not having to climb up makes a huge
difference, and being able to do with packetflux with a handful of
hundred dollar bills what the CMMs do, its a no brainer. but now we
have a bunch of parasitics laying around. They just wont die, so we
have to use them
On Fri, Jun 19, 2015 at 11:19 AM, George Skorup <[email protected]
<mailto:[email protected]>> wrote:
Yeah, I have a couple sites with either a SyncPipe Deluxe or a
SyncBox on top powered separately and a SyncInjector with it's own
Basic pipe at the bottom to provide redundant timing to some 450
sectors.
I also have some 450 sectors each with their own Parasitic pipes
because they're far apart on the tower. And I get some strange GPS
issues there when it rains or there's heavy cloud cover. So I
asked Forrest if it would be OK to put a sync over power pulse
through the Parasitic pipes. He said no issues and I've bench
tested it, so I'm going to add a SyncInjector on those APs
On 6/19/2015 11:06 AM, Ken Hohhof wrote:
I have mostly switched to using the Syncbox12 instead of
Parasitics. It does have a Syncinjector port on it (which I
haven’t had a use for).
*From:* Josh Luthman <mailto:[email protected]>
*Sent:* Friday, June 19, 2015 10:48 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 24v syncinjector wiring
1. From what I'm told you can do it. Just reverse the
blue/brown pairs. Sync pulse doesn't cause damage from what
Forrest said.
2.
http://manuals.packetflux.com/index.php?page=using-a-syncpipe-parasitic-with-a-syncinjector
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Jun 19, 2015 at 11:45 AM, That One Guy /sarcasm
<[email protected] <mailto:[email protected]>> wrote:
I thought I had read these are both doable,
1. Can I power ubnt devices off these? what is the cross
pinout? and do I need to turn off the sync pulse on that port?
2. Can I use a syncpipe parasitic on the syncinjector? Isnt
there a particular cable pinout to do this?
--
If you only see yourself as part of the team but you don't
see your team as part of yourself you have already failed as
part of the team.
--
If you only see yourself as part of the team but you don't see your
team as part of yourself you have already failed as part of the team.
