My sincere thanks to all who responded. Faisal expertly found the error in my config and everything is up and running correctly now.
Love it when you look at something so long you miss the obvious, simple part of tagging the vlan port on the switch you are passing through. Again, sincere thanks to all. -- Larry Smith lesm...@ecsis.net On Tue June 23 2015 09:46, Larry Smith wrote: > Ok, have a VLAN issue I cannot seem to beat. > Am at the point of willing to pay someone more expreienced than > me to resolve this so I can move forward. > > I have quite a few VLANs going to a Cisco 7206VXR and all those > are working fine (even the ones coming through/from mikrotik boxes). > This one is fiber from one tower location to my NOC (about 14 miles) > and currently has three VLANs, two go to my Cisco router and are > working fine, the third (was actually the first vlan on this box) goes > from the tower tik to my noc tik and I cannot seem to get it working > > Basic layout is Tower-TIK ethernet to Tower-Fiber-TIK (both CCR) > Fiber to NOC through Nortel 5510 Gig switch, two vlans break out > of the Nortel to the Cisco router, one breaks out to the NOC-Fiber-Tik. > > Any suggestions comments are welcome.
