I feel like this video all over again.... https://www.youtube.com/watch?v=rwLEwfitGkM (Hitler on Canopy)
Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Wed, Jul 15, 2015 at 7:51 PM, George Skorup <geo...@cbcast.com> wrote: > Why? I have no doubt he can make a 450i SyncInjector out of his gigabit > version. Granted, it's a change to 48/56VDC and port pinout, but he already > did that with the 320/430 SyncInjector anyway, although that wasn't > gigabit. The other thing he's talked about, a managed device that puts out > power and a sync pulse to feed the input of your GigE-POE-APC cards would > be a pretty badass combo. > > On 7/15/2015 6:20 PM, ch...@wbmfg.com wrote: > > I feel sorry for Forrest.... > > *From:* Matt Mangriotis <matt.mangrio...@cambiumnetworks.com> > *Sent:* Wednesday, July 15, 2015 4:21 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] 450d vs. 450i > > > Maybe I am being less than clear, so apologies for that. > > > > There are two RJ-45 ports on this product: > > > > 1 port is Data/Power (i.e. the main port) > > 1 port is AUX, which has (or will have) many functions, among them is > input/output of the sync pulse (i.e. UGPS) > > > > In summary, the radio supports “sync over power” via the CMM4 (using a > custom cable pinout) and 56 VDC. It also supports “sync over timing port” > via the UGPS (or other devices that perform similar functions) using the > AUX port (and custom cable). > > > > Does this make sense? > > > > Matt > > > > *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On > Behalf Of *SmarterBroadband > *Sent:* Wednesday, July 15, 2015 4:51 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] 450d vs. 450i > > > > Timing on the power port? > > > > *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On > Behalf Of *Matt Mangriotis > *Sent:* Wednesday, July 15, 2015 2:27 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] 450d vs. 450i > > > > Good questions. > > > > Both CMM4 and UGPS are supported with 450i. True, the 6-pin port became a > RJ-45 port, so the pinout is different. > > > > For connecting the CMM4, because the 450i is now powered by 802.3at PoE, > you’ll need the 56 VDC power supply and the cable from the CMM4 to the PMP > 450i AP has a different pinout. > > > > These cable pinouts will be documented in the user guides. > > > > PMP 450d is a SM only, so sync is taken from the AP. > > > > Matt > > > > *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On > Behalf Of *Brian Sullivan > *Sent:* Wednesday, July 15, 2015 3:47 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] 450d vs. 450i > > > > It has an AUX port that is Rj-45. No more Rj-11. > > On 7/15/2015 3:45 PM, Pavel Lyuty wrote: > > Sync only via CMM ? > > > > UGPS and other timing-port sync not supported ? > > > > > > > > 2015-07-15 17:55 GMT+03:00 Matt Mangriotis < > matt.mangrio...@cambiumnetworks.com>: > > These are two different products, addressing different markets. Cambium > is hard at work getting new products released at an increased rate, all > with the goal of providing solutions to help you guys build your businesses… > > > > Check out the Press Release and additional information on the 450i, which > was just released this morning: > > > > http://www.cambiumnetworks.com/pressreleases > > > > Feel free to ask questions about it here, or on our forum site also: > > > > > http://community.cambiumnetworks.com/t5/PMP-450/Introducing-Cambium-450i-PMP-and-PTP/m-p/42199#U42199 > > > > Matt > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Mike Hammett > *Sent:* Wednesday, July 15, 2015 8:33 AM > *To:* Animal Farm <af@afmug.com> > *Subject:* [AFMUG] 450d vs. 450i > > > > Am I correct in that these two products were developed independently of > each others' advancements? the 450d is just a regular 450 feature set in a > dish form factor and the 450i is all of the new capabilities, but in the > traditional form factors? > > > > > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > > Midwest Internet Exchange > http://www.midwest-ix.com > > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > > > > > > >
