As in your core, high density is 450, out skirts are non Cambium and you are looking for a cheaper solution to put in that will play nice with 450. On Jul 23, 2015, at 4:16 PM, Josh Luthman <j...@imaginenetworksllc.com<mailto:j...@imaginenetworksllc.com>> wrote:
How would 450/epmp co-location be relevant to non Cambium gear? I would imagine if someone starts with ePMP and then gets to the point where they need a little extra punch and can afford 450, sync would be extremely helpful. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jul 23, 2015 at 5:13 PM, Sakid Ahmed <sakid.ah...@cambiumnetworks.com<mailto:sakid.ah...@cambiumnetworks.com>> wrote: There are some technical challenges around further frame start accuracy that would have to be worked through. PMP100 syncing does not automatically give 450/430 syncing and it does require some additional work. We are curious to understand the use case for 450/ePMP co-location? Is it on the network fringes? Is it to swap non cambium gear :) Sakid On Jul 23, 2015, at 3:07 PM, Mike Hammett <af...@ics-il.net<mailto:af...@ics-il.net>> wrote: Not being a PMP user, what's different with 430\450 that makes it not match this new framing? I thought 100 synced with 430\450, therefore if ePMP matched 100, it would 430 and 450 as well. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com<http://www.ics-il.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL> Midwest Internet Exchange http://www.midwest-ix.com<http://www.midwest-ix.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix> ________________________________ From: "Sakid Ahmed" <sakid.ah...@cambiumnetworks.com<mailto:sakid.ah...@cambiumnetworks.com>> To: af@afmug.com<mailto:af@afmug.com> Sent: Thursday, July 23, 2015 3:02:14 PM Subject: Re: [AFMUG] ePMP + Radius Speaking of PMP100 co-location, we are seeking about 10 beta candidates who would be willing to co-locate ePMP 100 next to their PMP100. Following are some of the highlights - - Configure ePMP to 2.5 ms - Support 75/25 (the most tested configuration during beta) - Use CMM4 or onboard GPS with any combination on the PMP100 (Haven’t verified 3rd party sync just yet) - 5 MHz guard band for vertical install or replacing a couple of PMP100 with an ePMP 1000 & 90 degree sector - Offline frame calculator and a guide will be available Please hit Dan or I offline if you are interested. As always, thanks in advance. Sakid On Jul 23, 2015, at 2:38 PM, Dan Sullivan <daniel.sulli...@cambiumnetworks.com<mailto:daniel.sulli...@cambiumnetworks.com>> wrote: Paul, 2.5 will include: 2.5 msec frame Collocation with Canopy FSK AP WiFi providing connectivity to ePMP SM WiFi, Ubiquiti SM WiFi, and Mikrotik SM WiFi; and outdoor WiFi hotspot ePTP DFS channel support uPNP Dan From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul McCall Sent: Wednesday, July 22, 2015 9:26 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] ePMP + Radius Is there a feature list of what’s coming in 2.5 ? From: Af [mailto:af-boun...@afmug.com] On Behalf Of Dan Sullivan Sent: Wednesday, July 22, 2015 4:57 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] ePMP + Radius Hi, Our next release is 2.5.0 and it is coming out next month. The release after this will contain VLAN VSAs and RADIUS Authentication for the SMs. Daniel Sullivan ePMP Software Manager Cambium Networks Cambium Networks Community Forum<http://community.cambiumnetworks.com/> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luthman Sent: Wednesday, July 22, 2015 3:53 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] ePMP + Radius If you ask in the forum you get a pretty quick answer. It's always a solid answer, too. I don't think anything with VLANs changed in 2.4.3 but I don't use them. Nor do I use Radius. Josh Luthman Office: 937-552-2340<tel:937-552-2340> Direct: 937-552-2343<tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 22, 2015 at 4:50 PM, Gilbert T. Gutierrez, Jr. <mailing-li...@phxinternet.com<mailto:mailing-li...@phxinternet.com>> wrote: I saw that Cambium released software version 2.4.3 recently. I hoping they would allow the ability to assign VLANs with radius (does not look like they have). Does anyone know if Cambium ever plans on offering that functionality on the ePMP platform? Gilbert T. Gutierrez, Jr.