Maybe....personally I'm with Mike on this one. If I were deploying 450 I wouldn't get a second platform on different tower sites since it would end up costing more in labor/management/etc so you might as well have a hard asset.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jul 23, 2015 at 5:20 PM, Sakid Ahmed < sakid.ah...@cambiumnetworks.com> wrote: > As in your core, high density is 450, out skirts are non Cambium and you > are looking for a cheaper solution to put in that will play nice with 450. > > On Jul 23, 2015, at 4:16 PM, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > How would 450/epmp co-location be relevant to non Cambium gear? > > I would imagine if someone starts with ePMP and then gets to the point > where they need a little extra punch and can afford 450, sync would be > extremely helpful. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Thu, Jul 23, 2015 at 5:13 PM, Sakid Ahmed < > sakid.ah...@cambiumnetworks.com> wrote: > >> There are some technical challenges around further frame start accuracy >> that would have to be worked through. PMP100 syncing does not automatically >> give 450/430 syncing and it does require some additional work. >> We are curious to understand the use case for 450/ePMP co-location? Is it >> on the network fringes? Is it to swap non cambium gear :) >> >> Sakid >> >> >> On Jul 23, 2015, at 3:07 PM, Mike Hammett <af...@ics-il.net> wrote: >> >> Not being a PMP user, what's different with 430\450 that makes it not >> match this new framing? I thought 100 synced with 430\450, therefore if >> ePMP matched 100, it would 430 and 450 as well. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> >> Midwest Internet Exchange >> http://www.midwest-ix.com >> >> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> ------------------------------ >> *From: *"Sakid Ahmed" <sakid.ah...@cambiumnetworks.com> >> *To: *af@afmug.com >> *Sent: *Thursday, July 23, 2015 3:02:14 PM >> *Subject: *Re: [AFMUG] ePMP + Radius >> >> Speaking of PMP100 co-location, we are seeking about 10 beta candidates >> who would be willing to co-locate ePMP 100 next to their PMP100. Following >> are some of the highlights - >> >> - Configure ePMP to 2.5 ms >> - Support 75/25 (the most tested configuration during beta) >> - Use CMM4 or onboard GPS with any combination on the PMP100 (Haven’t >> verified 3rd party sync just yet) >> - 5 MHz guard band for vertical install or replacing a couple of PMP100 >> with an ePMP 1000 & 90 degree sector >> - Offline frame calculator and a guide will be available >> >> Please hit Dan or I offline if you are interested. As always, thanks in >> advance. >> >> Sakid >> >> On Jul 23, 2015, at 2:38 PM, Dan Sullivan < >> daniel.sulli...@cambiumnetworks.com> wrote: >> >> Paul, >> >> 2.5 will include: >> >> 2.5 msec frame >> Collocation with Canopy FSK >> AP WiFi providing connectivity to ePMP SM WiFi, Ubiquiti SM WiFi, and >> Mikrotik SM WiFi; and outdoor WiFi hotspot >> ePTP DFS channel support >> uPNP >> >> Dan >> >> *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On >> Behalf Of *Paul McCall >> *Sent:* Wednesday, July 22, 2015 9:26 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] ePMP + Radius >> >> Is there a feature list of what’s coming in 2.5 ? >> >> *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On >> Behalf Of *Dan Sullivan >> *Sent:* Wednesday, July 22, 2015 4:57 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] ePMP + Radius >> >> Hi, >> >> Our next release is 2.5.0 and it is coming out next month. >> >> The release after this will contain VLAN VSAs and RADIUS Authentication >> for the SMs. >> >> Daniel Sullivan >> ePMP Software Manager >> Cambium Networks >> Cambium Networks Community Forum <http://community.cambiumnetworks.com/> >> >> >> *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On >> Behalf Of *Josh Luthman >> *Sent:* Wednesday, July 22, 2015 3:53 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] ePMP + Radius >> >> If you ask in the forum you get a pretty quick answer. It's always a >> solid answer, too. >> >> I don't think anything with VLANs changed in 2.4.3 but I don't use >> them. Nor do I use Radius. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Wed, Jul 22, 2015 at 4:50 PM, Gilbert T. Gutierrez, Jr. < >> mailing-li...@phxinternet.com> wrote: >> I saw that Cambium released software version 2.4.3 recently. I hoping >> they would allow the ability to assign VLANs with radius (does not look >> like they have). Does anyone know if Cambium ever plans on offering that >> functionality on the ePMP platform? >> >> Gilbert T. Gutierrez, Jr. >> >> >> > >
