We have an AF5x link that's just under 16 miles using 2' dishes, using a
20mhz channel it will pretty consistently do about 130Mbps aggregate, but
it's not quite good enough to do 256qam... it could probably do a bit
better with 3' dishes.

Don't judge the airFibers based on experience with other UBNT radios...
they're much more consistent and there shouldn't be any issues with OSPF.

On Mon, Aug 10, 2015 at 10:39 AM, Andreas Wiatowski <
andr...@silowireless.com> wrote:

> Hi All,
>
>
>
> I am wondering if anyone can tell me what you are seeing with the Airfiber
> 5x product from Ubiquiti on a 20Mhz channel in terms of speed.
>
>
>
> We have invested a lot of money into 650’s from Cambium and licenced SAF.
> We have been using the MT QRT product as a cost conscience backhaul as
> well.   I had a lot of bad experiences with the Ubiquiti products in the
> past…but the AF 24 has been solid small hop contender.   My caution, In
> particular, is that we had to use NBMA in order to get OSPF to work
> properly with Rocket M5’s and we found the speeds to be all over the place
> with the product…no consistency.
>
>
>
> Any comments / kudos / considerations???
>
>
>
>
>
> Cheers,
>
> ______________________________
>
> Andreas Wiatowski | CEO
>
> Silo Wireless Inc.
>
> Email  andr...@silowireless.com
>
> 19 Sage Court
>
> Brantford, Ontario N3R 7T4 (CANADA)
>
> Tel +1.519.449.5656  Extension-600|Fax +1.519.449.5536 |Toll Free
> +1.866.727.4138
> Website http://www.silowireless.com/  | Facebook
> http://www.facebook.com/silowireless | Twitter @silowireless
>
> This electronic message and all of its contents and attachments contain
> information from the offices of Silo Wireless Inc., which may be
> privileged, confidential or otherwise protected from disclosure.  The
> information is intended to be for the addressee only.  If you are not the
> addressee, then any disclosure, copying, distribution or use of this
> message, or its contents or any of its attachments, is prohibited.  If you
> have received this electronic message in error, please notify us
> immediately and destroy the original message and all copies.
>
>
>

Reply via email to