That's pretty cool to know about but it doesn't help me in so far as not having to trench in all of that cable this is in the middle of a bicycle park and it can't just lay on the ground trenching in the cable is what I'm trying to avoid if I'm going to dig a trench all that distance just a very ethernet I would rather put Power in it and have the ability to run several radios out there if future needs required it
Sent from my iPhone > On Aug 18, 2015, at 16:07, Bill Prince <[email protected]> wrote: > > These things will go up to 800 meters, which is right at 1/2 mile. > > http://streakwave.com/Itemdesc.asp?ic=VLS-1P-B&o1=0 > bp > <part15sbs{at}gmail{dot}com> > >> On 8/18/2015 2:04 PM, Craig House wrote: >> Only the number of batteries that I would need to have but then I've never >> done solar and battery powered stuff before so maybe I'm not thinking about >> this correctly >> >> Sent from my iPhone >> >>> On Aug 18, 2015, at 16:02, Chuck McCown <[email protected]> wrote: >>> >>> Is there a reason you don't want to use 24 volts? >>> >>> -----Original Message----- From: Craig House >>> Sent: Tuesday, August 18, 2015 2:56 PM >>> To: [email protected] >>> Subject: [AFMUG] Ubiquity radios on 12 V >>> >>> I have a customer who is wanting a relay pole installed on the top of the >>> hill that he owns in order to bring line of sight service from one of our >>> towers and bounce it down to his facilities in the Valley. There is no >>> power within a half a mile of this location and I'm curious if to ubiquity >>> radios would run on 12 V batteries without problems. I can get a small >>> solar panel set up and test to see how long they will last but before I >>> power them from 12 V I want to make sure it's even possible for them to work >>> >>> Sent from my iPhone >
