Need to double up the amperage of the batteries and panels to charge them...
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 18, 2015 5:53 PM, "Jaime Solorza" <[email protected]> wrote: > http://www.streakwave.com/itemdesc.asp?ic=TP-SCPOE-1224 > > same one I used in Marfa area hunting ranch > > Jaime Solorza > Wireless Systems Architect > 915-861-1390 > > On Tue, Aug 18, 2015 at 3:45 PM, Jaime Solorza <[email protected]> > wrote: > >> Epcom.net sells a solar converter that takes 12 vdc and has POE out at >> 24vdc works with Ubiquiti radios and cameras...been there ...done >> that...and its not expensive >> >> Jaime Solorza >> Wireless Systems Architect >> 915-861-1390 >> >> On Tue, Aug 18, 2015 at 3:07 PM, Josh Luthman < >> [email protected]> wrote: >> >>> You might look at converting the 12v to 24v but I would guess that's far >>> less efficient cost wise. >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> On Aug 18, 2015 5:04 PM, "Craig House" <[email protected]> wrote: >>> >>>> Only the number of batteries that I would need to have but then I've >>>> never done solar and battery powered stuff before so maybe I'm not thinking >>>> about this correctly >>>> >>>> Sent from my iPhone >>>> >>>> > On Aug 18, 2015, at 16:02, Chuck McCown <[email protected]> wrote: >>>> > >>>> > Is there a reason you don't want to use 24 volts? >>>> > >>>> > -----Original Message----- From: Craig House >>>> > Sent: Tuesday, August 18, 2015 2:56 PM >>>> > To: [email protected] >>>> > Subject: [AFMUG] Ubiquity radios on 12 V >>>> > >>>> > I have a customer who is wanting a relay pole installed on the top of >>>> the hill that he owns in order to bring line of sight service from one of >>>> our towers and bounce it down to his facilities in the Valley. There is no >>>> power within a half a mile of this location and I'm curious if to ubiquity >>>> radios would run on 12 V batteries without problems. I can get a small >>>> solar panel set up and test to see how long they will last but before I >>>> power them from 12 V I want to make sure it's even possible for them to >>>> work >>>> > >>>> > Sent from my iPhone >>>> >>> >> >
