Thank you for your response. I think my question did not go deep enough.
Here are some issue I have...
1. I do not know if what PoE standards are used by the different radios.
As I am doing my research, I am seeing that there are 2 standards
802.3af (2 pairs providing power?) and 802.3at (All 4 pairs providing
power?).
2. I have 2 test sites that I am using to determine what I am going to
roll out to other sites.
a. Site 1 has a 48V power plant and a device like yours looks like
it could work (site has a proxim radio).
b. Site 2 has a 24V power plant (site has a AF24 radio).
My SAF radios come with power injectors that allow me to input 24V or
48V and output 48V to the radios allowing me to use those with different
power plants. My site 2 needs a power supply that can take the 24V input
and bump it before putting it on the line.
Gilbert
On 9/14/2015 9:47 AM, Chuck McCown wrote:
http://www.mccowntech.com/gige-poe-apc-ethernet-surge-suppressor-protector/
http://www.mccowntech.com/gige-poe-midspan-poe-injector-ethernet-surge-suppressor-protector/
-----Original Message----- From: Gilbert T. Gutierrez, Jr.
Sent: Monday, September 14, 2015 10:45 AM
To: af@afmug.com
Subject: [AFMUG] GigE DC PoE Injectors
I am moving many of my sites to DC Power Plants and need to find DC PoE
injectors for the following radios...
Proxim Tsunami QB-8200 (I believe the pinouts are the same as a SAF
licensed radio)
Ubiquit airFiber 24
These radios are all 48V input and I am looking for injectors to power
them that will accept both 48V and/or 24V inputs. Does anyone have any
suggestions?
Gilbert
