they removed some of the encryption modes On Wed, Oct 7, 2015 at 2:57 PM, Justin Marshall <just...@pdmnet.net> wrote:
> Hi, > > > > > > I recently updated a UBNT Rocket M5 to 5.6.2 from 5.5.4. Since this > update, one of the clients will not connect. > > > > This AP originally had 6 SM’s connected at 5490. After the upgrade from > 5.5.4 to 5.6.2, 2 of the SM’s didn’t come back. These 2 were not at the > best signal (-86 and -89). If I swapped frequencies to 5740 the 1 > connected at -86 popped back up at an -88 and the other SM’s are ~-2 db. > But still no sign of the one that was at -89. > > > > This led me to believe UBNT probably lowered the output power for DFS > frequencies somewhere between 5.5.4 and 5.6.2… > > > > One would think that downgrading the SM’s and AP back down to 5.5.4 would > put things back the way they were but that doesn’t seem to be the case. > > > > I even sent a tech onsite to swap out the unreachable SM with one that had > 5.5.4 on it. He said the one with 5.5.4 and the one with 5.6.2 both see > the AP at -89 under “Site survey” but won’t register to the AP. > > > > I’m at a loss here… Does anyone have any suggestions of things to try, or > a magic firmware version (folks on the UBNT forums say 5.5.4 is best for > DFS frequencies) that might make this AP act the way it did prior to > upgrading to 5.6.2? > > I’ve already tried every other 5 Ghz Frequency available (with a mix of > different country codes), most with worse results. > > > > Thanks, > > Justin > > just...@pdmnet.net > > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
