5.6.2 has no power changes. Power changes came into play 5.6.3beta-something
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 7, 2015 at 5:50 PM, Mathew Howard <mhoward...@gmail.com> wrote: > If they were that weak, I'm guessing the clients weren't running at 30dbm > EIRP. before v5.6.x, clients could run at full power regardless of whether > it was legal in that particular band. So if, for example, we're talking > about a NanoBridge M5-25, it could've been (and probably was) running at > 23dbm Tx Power, but legally it can only run at 5dBm in the DFS band, so > when you upgraded to 5.6.2 it forced it to the legal limit so you lost some > 18db... if it was at -86, that's obviously not going to work. > > On Wed, Oct 7, 2015 at 4:41 PM, Bill Prince <part15...@gmail.com> wrote: > >> -89 is not a "usable" power level IMO. >> >> bp >> <part15sbs{at}gmail{dot}com> >> >> >> On 10/7/2015 12:57 PM, Justin Marshall wrote: >> >> Hi, >> >> � >> >> � >> >> I recently updated a UBNT Rocket M5 to 5.6.2 from 5.5.4. Since this >> update, one of the clients will not connect. >> >> � >> >> This AP originally had 6 SM�s connected at 5490.� After the upgrade >> from 5.5.4 to 5.6.2, 2 of the SM�s didn�t come back. �These 2 were >> not at the best signal (-86 and -89).� If I swapped frequencies to 5740 >> the 1 connected at -86 popped back up at an -88 and the other SM�s are >> ~-2 db.� But still no sign of the one that was at -89. >> >> � >> >> This led me to believe UBNT probably lowered the output power for DFS >> frequencies somewhere between 5.5.4 and 5.6.2� >> >> � >> >> One would think that downgrading the SM�s and AP back down to 5.5.4 >> would put things back the way they were but that doesn�t seem to be the >> case. >> >> � >> >> I even sent a tech onsite to swap out the unreachable SM with one that >> had 5.5.4 on it.� He said the one with 5.5.4 and the one with 5.6.2 both >> see the AP at -89 under �Site survey� but won�t register to the AP. >> >> � >> >> I�m at a loss here� Does anyone have any suggestions of things to >> try, or a magic firmware version (folks on the UBNT forums say 5.5.4 is >> best for DFS frequencies) that might make this AP act the way it did prior >> to upgrading to 5.6.2? >> >> I�ve already tried every other 5 Ghz Frequency available (with a mix of >> different country codes), most with worse results. >> >> � >> >> Thanks, >> >> Justin >> >> just...@pdmnet.net >> >> � >> >> >> >