Put the firmware on it anyway IMO. Is the slave side losing uptime or just losing association? Other gear on the tower staying powered?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 14, 2016 12:49 PM, "George Skorup" <geo...@cbcast.com> wrote: > I've had this 13.7 mile link running v2.5, 5.1 band, 20MHz, non-GPS radios > for 110 days without any issues. I switched the slave scan to include 40MHz > and then moved the master to 40MHz width the other day. Since then it > appears the slave has been rebooting. However this morning, the link wasn't > passing traffic for over two hours, then it magically fixed itself. An hour > later and it rebooted. I remember reading some stuff, possibly release > notes, that the ePTP slave could reboot under heavy interference. This link > is on a very clean channel though. About -58 RSSI and it maintains MCS 15 > both directions nearly all the time. > > So I don't have a clue. Ran perfect on 20MHz channel bandwidth. Just > needed a little more throughput out of it, thus 40MHz. I just upgraded both > ends to v2.6, so I hope that fixes it. > > And no, these radios are not CE+ MACs. >