There still seems to be some misconception on this. 8X/1X means that
it's 8X capable / 1X current. It's always going to show 8X capable (or
2X for FSK, 3X for 430). After the / is what you need to pay attention
to. Also, the uplink and downlink are independent. On the AP session
status page (power tab), that's the downlink rate to that SM. On the SM
main page, link status, etc., that's the uplink rate to the AP.
What band is this? 2.4, 3.6, 5.4 or 5.7? And what software version do
you have on the radios? It'd be best to stick with 13.2.1 for now.
For the longest time I too thought this was backwards. I assure you it's
correct.
On 2/1/2016 2:26 PM, Ryan Mano wrote:
8x down 1x up
this is the first sm am trying to install on it
the freq am on is very clean not sure what the problem is....unless am
missing a setting?
------------------------------------------------------------------------
*From:* Af <af-boun...@afmug.com> on behalf of Josh Luthman
<j...@imaginenetworksllc.com>
*Sent:* Monday, February 1, 2016 3:17 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] pmp450
Signals on each side?
8x down 1x up? Could be an uplink path issue or heavy interference at
the AP side. Have you changed frequencies? Spectrum analysis? Is
this the first SM on the AP?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Feb 1, 2016 at 3:16 PM, Ryan Mano <rm...@corp.mdswireless.com
<mailto:rm...@corp.mdswireless.com>> wrote:
am new to the pmp450 looks straight forward but am having issues
registering it from a distance
when I point the sm which is 12 feet in front of the ap it syncs
8x by 1x ...but if I go 1mile down the road it doesn't register at all
not sure what am doing wrong...has anyone had this similar issue
like this?
thanks
