What size mast are you using at 12'? I would think you need to get up to
2" or so at that height with a dish like the Force 200?
bp
<part15sbs{at}gmail{dot}com>
On 2/2/2016 9:43 AM, Ken Hohhof wrote:
I was just asking because once we get over 10-12 feet with a pipe,
there seems to be quite a bit of bobbing around if there’s significant
windload at the top. Not so much a problem side-to-side, but
front-to-back affects the dish aiming. Usually at 24 feet, we would
be recommending a utility pole or a Rohn 25G.
Also a lot of our area, the wind seems to howl 11 months out of the
year (except August when you actually wish for a breeze), and we have
trouble with metal fatigue and bolts vibrating loose.
Microbursts are also a problem, it will lay the corn down like a crop
circle, and rip the siding off houses.
I know this is partly because we have open cropland where the the wind
can blow for miles, also some ridges which are very exposed. You know
there’s wind when people come to build wind farms by you. It looks
like you have trees, so maybe that slows the wind down a bit.
*From:* Ben Royer <mailto:operati...@royell.net>
*Sent:* Tuesday, February 02, 2016 11:14 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] First Force 200 5 GHz!
The pipe? You’d be surprised, they do pretty good in winds, we install
those on a TV tower too. We use a PD46 HD bracket, with 4’ attached
to the tower, and the remaining 20’ in the air. We can get 40 to 50
MPH Gusts in storms here, and have had very few fail. The only time
I’ve had any fail, it’s usually the brackets twist on the tower, and
that’s tornado weather, and extremely rare. We’ve installed hundreds
of these, and maybe had less than a handful need fixed. As far as the
radio/antenna, those don’t mind the wind much, I’d say an old
Hyperlink 24 Dbi Grid is more wind sensitive than that, or at least a
close comparison.
Thank you,
Ben Royer, Operations Manager
Royell Communications, Inc.
217-965-3699 www.royell.net
*From:* Ken Hohhof <mailto:af...@kwisp.com>
*Sent:* Tuesday, February 02, 2016 11:08 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] First Force 200 5 GHz!
What kind of winds can that withstand?
*From:* Ben Royer <mailto:operati...@royell.net>
*Sent:* Tuesday, February 02, 2016 11:02 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] First Force 200 5 GHz!
Here you go Ray! Using one of our famous 24’ Pipe setups. -68 at 4.47
miles through some trees, shooting just to the right of that big tree
nearby. 10MB account.
Thank you,
Ben Royer, Operations Manager
Royell Communications, Inc.
217-965-3699 www.royell.net
*From:* Ray Savich <mailto:ray.sav...@cambiumnetworks.com>
*Sent:* Tuesday, February 02, 2016 10:34 AM
*To:* mailto:af@afmug.com
*Subject:* Re: [AFMUG] First Force 200 5 GHz!
Josh is the first of 10 to win.
All you need to do is post a photo of your 5 GHz Force 200 to a
Community and send us the link. Eligible Communities include AF,
WISPA, DSLReports, Cambium Community, and others…
Ray
Join the Conversation
Cambium Networks Community Forum <http://community.cambiumnetworks.com/>