YES! We are undertaking this project and working toward a next generation PMP 450 SM that will cover the entire 5 GHz band (from 4.9-5.9 GHz), and be less expensive than the 450i SM.
At this point, I can’t comment on much surrounding the launch, as we’ve only recently embarked down this path. Matt From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sam Lambie Sent: Sunday, February 21, 2016 8:59 PM To: af@afmug.com Subject: Re: [AFMUG] 450i 5.1 and 5.2 non overlapping channels? Thank you Matt. I appreciate the info. Are there any plans on creating 1 450 SM that can handle all 4 frequencies? That would be super.... On Sat, Feb 20, 2016 at 3:30 PM, George Skorup <geo...@cbcast.com<mailto:geo...@cbcast.com>> wrote: No, the regular 450 is hardware limited to 5470-5900. On 2/20/2016 3:55 PM, Jeff Broadwick - Lists wrote: Will the 450 CPE work in 5.2? Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519<tel:312-205-2519> Office 574-220-7826<tel:574-220-7826> Cell jbroadw...@converge-tech.com<mailto:jbroadw...@converge-tech.com> On Feb 20, 2016, at 2:45 PM, Tushar Patel <tpa...@ecpi.com<mailto:tpa...@ecpi.com>> wrote: Matt, To take advantage don't we need cheaper CPE? Tushar On Feb 20, 2016, at 12:43 PM, Matt Mangriotis <matt.mangrio...@cambiumnetworks.com<mailto:matt.mangrio...@cambiumnetworks.com>> wrote: Didn’t see anyone answer you on this Sam. 5.1 GHz (UNII-1) is 100 MHz (5150-5250 MHz), and is not DFS controlled, and follows similar rules to 5.8 GHz. This band is available in R14.1.1. 5.2 GHz (UNII-2) is also 100 MHz (5250-5350 MHz), but is a bit less useful in that the max EIRP allowed is 30 dBm and it’s subject to DFS radar detection mechanisms. Additional info: https://en.wikipedia.org/wiki/U-NII Taking advantage of these bands, however, can prove hugely useful and several of our customers are getting equipment deployed and working soon. (Note: 5.2 and 5.4 will be supported in the R14.1.2 beta release that will be out very soon). Matt From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sam Lambie Sent: Friday, February 19, 2016 4:54 PM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] 450i 5.1 and 5.2 non overlapping channels? Is there any documentation or list knowledge on how big each frequency is? Just wondering if it is worth it to go to the 450i and the ridiculously expensive SM's. We are running out of spectrum in 5.4 and 5.8 though. -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598<tel:575-758-7598> Office www.Taosnet.com<http://www.newmex.com> -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com<http://www.newmex.com>