Oh oops Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Feb 25, 2016 10:42 AM, "Mathew Howard" <mhoward...@gmail.com> wrote:
> Correct - that's why I said except for the connectorized/force110 ;-) > > All of GPS radios, the Force 180, Force 200 and all of the 2.4ghz stuff > will work with either polarity. > > On Thu, Feb 25, 2016 at 9:35 AM, Josh Luthman <j...@imaginenetworksllc.com > > wrote: > >> I don't think force 110 works with UBNT POE does it? >> >> I thought that was a new benefit of force 200. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Feb 25, 2016 10:34 AM, "Mathew Howard" <mhoward...@gmail.com> wrote: >> >>> Yeah, all the ePMP's except for the old integrated 5ghz and the non-GPS >>> connectorized 5ghz/Force110 will work with either PoE polarity. >>> >>> On Thu, Feb 25, 2016 at 9:20 AM, Chuck McCown <ch...@wbmfg.com> wrote: >>> >>>> Same customer replies with something I didn’t know: >>>> >>>> >>>> >>>> Yes, the newer Cambium ePMP Force 180 ship standard with a 1Gbps PoE >>>> and >>>> are 1Gbps Ethernet interfaces. We currently have the 444S-REV-A2 >>>> surge >>>> suppressors. >>>> >>>> Note that the Force 180 is backward compatible with the older Canopy >>>> PoE >>>> and Canopy 600SS surge suppressors (in fact even the first generation >>>> of >>>> the Canopy surge suppressors appear to work so far). As far as I am >>>> aware from their current docs (webinars), the newer ePMP Force 180 will >>>> 'autosense' which PoE is being used and work. Therefore, this allows >>>> for >>>> both the legacy PoE adapters and (competitors as well) to work on the >>>> devices without having to worry about that reverse pin-out story or >>>> power. >>>> >>>> I haven't attempted to test the 444SS surge with the 100Mbps PoE >>>> adapters as yet. Maybe I will try that and give you my results. >>>> >>>> >>>> *From:* Josh Luthman <j...@imaginenetworksllc.com> >>>> *Sent:* Thursday, February 25, 2016 7:10 AM >>>> *To:* af@afmug.com >>>> *Subject:* Re: [AFMUG] epmp 1000 poe >>>> >>>> >>>> AP is gig. Force 180 is the new integrated sideways radio also gig. >>>> >>>> Force 110 isn't gig. >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> On Feb 25, 2016 9:06 AM, "Chuck McCown" <ch...@wbmfg.com> wrote: >>>> >>>>> I had this in my inbox this morning: >>>>> >>>>> Hi; >>>>> >>>>> We tried to install the 444SS-SMT surge suppressor to be used with the >>>>> Cambium Networks ePMP 1000 series SMs (ePMP Force 180) and the SM >>>>> would >>>>> not come on and/or was accessible via IP. >>>>> >>>>> Is the 444SS-SMT surge suppressor compatible with the 1000 series? If >>>>> so, is there something else that we should be doing in order to get it >>>>> working? >>>>> >>>>> Isn’t the ePMP 1000 etc all GigE configuration? >>>>> >>>>> >>>>> >>>> >>> >
