I’m talking about my experience that the clip won’t latch to the DIN rail unless you pull the tab slightly forward. Not prying with a little screwdriver to unlatch it, that’s expected.
From: Forrest Christian (List Account) Sent: Monday, February 29, 2016 1:33 PM To: af Subject: Re: [AFMUG] racmount kit for Packetflux SyncInjector? We just added common parts to the store late last week. Evidently we need to do a better job of describing some of them. The end of the din clip on the syncinjector was hidden slightly behind the syncinjector on purpose. The idea is that a small screwdriver can be placed in the hole on the bottom of the din clip and the bottom of the syncinjector can be used as a fulcrum point to enable easy removal of the clip from the din rail. On Feb 29, 2016 9:02 AM, "Ken Hohhof" <af...@kwisp.com> wrote: No, I think you want this: http://store.packetflux.com/din-rail-mounting-kit-for-rev-h-i-syncinjectors/ The thing you linked to is essentially a tiny piece of plastic DIN rail for wallmounting stuff that is already DIN rail mountable. Also note the DIN rail mounting kit for Syncinjectors can be fussy about snapping onto the rail until you figure out the lever may need to be pulled forward a bit. Easy if you can get a finger behind it, if you have it in close quarters you might need to improvise a tool to hook it. From: Kurt Fankhauser Sent: Monday, February 29, 2016 10:51 AM To: af@afmug.com Subject: Re: [AFMUG] racmount kit for Packetflux SyncInjector? is this the proper product to DIN rail mount my sync injector? http://store.packetflux.com/din-rail-clip/ On Sun, Feb 28, 2016 at 9:21 PM, Jeremy <jeremysmi...@gmail.com> wrote: Wow, I totally botched that earlier. The Brother printer FAQ is likely not going to help with a Packetflux rack mount. Too many windows open! On Sun, Feb 28, 2016 at 2:08 PM, Jeremy <jeremysmi...@gmail.com> wrote: This would probably work http://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=mfc8480dn_us&ftype3=1984&faqid=faq00000185_003 On Sun, Feb 28, 2016 at 12:34 PM, Chuck McCown <ch...@wbmfg.com> wrote: Buy a small CNC milling machine. Get BUD or Hammond or others from Mouser or Digi-Key and modify them. Only way to keep the cost out. From: Forrest Christian (List Account) Sent: Saturday, February 27, 2016 9:44 PM To: af Subject: Re: [AFMUG] racmount kit for Packetflux SyncInjector? The units are designed to fit on a standard 1u shelf. Zip ties. Velcro. Bolts into the wall mount keyholes etc. On a related note, if anyone knows a enclosure manufacturer I can buy custom 1u enclosures from in reasonable quantities (hundred or hundreds) without paying an arm and three legs please let me know. We've been having a hard time finding a vendor... I lost track of how many vendors we've unsuccessfully tried to get those from. On Feb 27, 2016 11:33 AM, "Kurt Fankhauser" <lists.wavel...@gmail.com> wrote: Is there any rackmount kits out there for the packet flux sync injectors? Just looked over their website and only seen a DIN rail option? Is anyone making something possibly 3rd party for this?
