Not very clean cuts, though. I just order 16" pieces from eBay for a couple bucks, the stuff is CHEAP on there.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Mar 1, 2016 at 10:45 AM, Christopher Tyler <ch...@totalhighspeed.net > wrote: > Our rail cutter was only $5 from harbor-freight. > It's called a hacksaw. > > -- > Christopher Tyler > MTCRE/MTCNA/MTCTCE/MTCWE > Total Highspeed Internet Services > 417.851.1107 > > ----- Original Message ----- > From: "George Skorup" <geo...@cbcast.com> > To: af@afmug.com > Sent: Monday, February 29, 2016 6:21:27 PM > Subject: Re: [AFMUG] racmount kit for Packetflux SyncInjector? > > I've found that aluminum rail tends to be much more forgiving. Something > about the steel rail always gave me fitment issues. Perhaps the Phoenix > Contact steel stuff I was using is just slightly over sized. Aluminum > all the way now. Easier to cut and clean. And no, there's no way in hell > I'd every spend $$ on a rail cutter for the one or two a month that I do. > > On 2/29/2016 2:04 PM, Ken Hohhof wrote: > > I’m talking about my experience that the clip won’t latch to the DIN > > rail unless you pull the tab slightly forward. Not prying with a > > little screwdriver to unlatch it, that’s expected. > > *From:* Forrest Christian (List Account) <mailto:li...@packetflux.com> > > *Sent:* Monday, February 29, 2016 1:33 PM > > *To:* af <mailto:af@afmug.com> > > *Subject:* Re: [AFMUG] racmount kit for Packetflux SyncInjector? > > > > We just added common parts to the store late last week. Evidently we > > need to do a better job of describing some of them. > > > > The end of the din clip on the syncinjector was hidden slightly behind > > the syncinjector on purpose. The idea is that a small screwdriver can > > be placed in the hole on the bottom of the din clip and the bottom of > > the syncinjector can be used as a fulcrum point to enable easy removal > > of the clip from the din rail. > > > > On Feb 29, 2016 9:02 AM, "Ken Hohhof" <af...@kwisp.com > > <mailto:af...@kwisp.com>> wrote: > > > > No, I think you want this: > > > http://store.packetflux.com/din-rail-mounting-kit-for-rev-h-i-syncinjectors/ > > The thing you linked to is essentially a tiny piece of plastic DIN > > rail for wallmounting stuff that is already DIN rail mountable. > > Also note the DIN rail mounting kit for Syncinjectors can be fussy > > about snapping onto the rail until you figure out the lever may > > need to be pulled forward a bit. Easy if you can get a finger > > behind it, if you have it in close quarters you might need to > > improvise a tool to hook it. > > *From:* Kurt Fankhauser <mailto:lists.wavel...@gmail.com> > > *Sent:* Monday, February 29, 2016 10:51 AM > > *To:* af@afmug.com <mailto:af@afmug.com> > > *Subject:* Re: [AFMUG] racmount kit for Packetflux SyncInjector? > > is this the proper product to DIN rail mount my sync injector? > > http://store.packetflux.com/din-rail-clip/ > > On Sun, Feb 28, 2016 at 9:21 PM, Jeremy <jeremysmi...@gmail.com > > <mailto:jeremysmi...@gmail.com>> wrote: > > > > Wow, I totally botched that earlier. The Brother printer FAQ > > is likely not going to help with a Packetflux rack mount. Too > > many windows open! > > On Sun, Feb 28, 2016 at 2:08 PM, Jeremy > > <jeremysmi...@gmail.com <mailto:jeremysmi...@gmail.com>> wrote: > > > > This would probably work > > > http://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=mfc8480dn_us&ftype3=1984&faqid=faq00000185_003 > > On Sun, Feb 28, 2016 at 12:34 PM, Chuck McCown > > <ch...@wbmfg.com <mailto:ch...@wbmfg.com>> wrote: > > > > Buy a small CNC milling machine. Get BUD or Hammond > > or others from Mouser or Digi-Key and modify them. > > Only way to keep the cost out. > > *From:* Forrest Christian (List Account) > > <mailto:li...@packetflux.com> > > *Sent:* Saturday, February 27, 2016 9:44 PM > > *To:* af <mailto:af@afmug.com> > > *Subject:* Re: [AFMUG] racmount kit for Packetflux > > SyncInjector? > > > > The units are designed to fit on a standard 1u shelf. > > Zip ties. Velcro. Bolts into the wall mount keyholes > > etc. > > > > On a related note, if anyone knows a enclosure > > manufacturer I can buy custom 1u enclosures from in > > reasonable quantities (hundred or hundreds) without > > paying an arm and three legs please let me know. > > We've been having a hard time finding a vendor... I > > lost track of how many vendors we've unsuccessfully > > tried to get those from. > > > > On Feb 27, 2016 11:33 AM, "Kurt Fankhauser" > > <lists.wavel...@gmail.com > > <mailto:lists.wavel...@gmail.com>> wrote: > > > > Is there any rackmount kits out there for the > > packet flux sync injectors? Just looked over their > > website and only seen a DIN rail option? Is anyone > > making something possibly 3rd party for this? > > > >