We had some old Antel V-pol 900 omni's. 11.5 feet IIRC. Those sucked. V
pol is useless. OK, nevermind, 900 is useless now.
On 2/29/2016 6:20 PM, Josh Luthman wrote:
That's just nuts.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Feb 29, 2016 at 7:17 PM, Jaime Solorza
<losguyswirel...@gmail.com <mailto:losguyswirel...@gmail.com>> wrote:
Scala 900 omni is about 10ft
On Feb 29, 2016 9:50 AM, "Chuck McCown" <ch...@wbmfg.com
<mailto:ch...@wbmfg.com>> wrote:
Roughly double the size for every 3 dB improvement in gain.
*From:* Brandon Yuchasz <mailto:li...@gogebicrange.net>
*Sent:* Monday, February 29, 2016 9:49 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] Laird ODH9-9 or Alternative
Chuck how big would an antenna have to get to get up into the
9 or 10 dB range?
Best regards,
Brandon Yuchasz
GogebicRange.net
www.gogebicrange.net <http://www.gogebicrange.net/>
*From:*Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] *On Behalf Of *Chuck McCown
*Sent:* Wednesday, February 24, 2016 5:01 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] Laird ODH9-9 or Alternative
Depends on gain. 6 dB would probably be 5 feet tall.
*From:*Mathew Howard <mailto:mhoward...@gmail.com>
*Sent:*Wednesday, February 24, 2016 4:00 PM
*To:*af <mailto:af@afmug.com>
*Subject:*Re: [AFMUG] Laird ODH9-9 or Alternative
How tall would something like that be?
On Wed, Feb 24, 2016 at 4:53 PM, Chuck McCown <ch...@wbmfg.com
<mailto:ch...@wbmfg.com>> wrote:
I did a nice 6 dB H pol omni a few years ago. Never released
it. I could do a dual slant 900 omni. It would be probably 8
inches in diameter.
*From:*Chuck Hogg <mailto:ch...@shelbybb.com>
*Sent:*Wednesday, February 24, 2016 3:51 PM
*To:*af@afmug.com <mailto:af@afmug.com>
*Subject:*Re: [AFMUG] Laird ODH9-9 or Alternative
9dB is what we have now.
Regards,
Chuck
On Wed, Feb 24, 2016 at 4:39 PM, Chuck McCown <ch...@wbmfg.com
<mailto:ch...@wbmfg.com>> wrote:
How much gain are you looking for?
*From:*Chuck Hogg <mailto:ch...@shelbybb.com>
*Sent:*Wednesday, February 24, 2016 2:36 PM
*To:*af@afmug.com <mailto:af@afmug.com> ; memb...@wispa.org
<mailto:memb...@wispa.org>
*Subject:*[AFMUG] Laird ODH9-9 or Alternative
Hello:
I recently just tried to get an ODH9-9 900MHz Horizontal Omni,
to find out they quit making it. Every few years they have to
be replaced because the internals rust out, but we are used to
identifying the issue and replacing them when it happens.
So, does anyone have any NIB ODH9-9 omnis they are willing to
part with? Or am I going to have to switch to Amphenol?
Regards,
Chuck