Do you know this, or are you speculating? My information was that Connect-It fabricated all their stuff in Florida including the galvanizing. That’s one reason I liked buying from them. That and their workmanship (welding and galvanizing) seemed better than Andrew/Commscope.
Sitepro1/Valmont does import parts from China, which they do not hide, it is stamped right into them. I am sad to report however that the quality seems quite good. Remember that virtually all brand name tools are made in China, not just Harbor Freight. They can make junk and they can make good stuff. From: Bill Prince Sent: Thursday, March 10, 2016 8:27 PM To: af@afmug.com Subject: Re: [AFMUG] 5GHz Omni standoff Chinese steel. Otherwise known as zinc-plated lead. bp <part15sbs{at}gmail{dot}com> On 3/10/2016 6:25 PM, Chuck McCown wrote: Hmmm, that is very low. Like lower than wholesale low. I wonder how they do it for that... From: Ken Hohhof Sent: Thursday, March 10, 2016 5:48 PM To: af@afmug.com Subject: Re: [AFMUG] 5GHz Omni standoff $78 (plus shipping) here: http://ciwireless1-px.rtrk.com/product/tower-antenna-standoff/ From: Kurt Fankhauser Sent: Thursday, March 10, 2016 6:31 PM To: af@afmug.com Subject: Re: [AFMUG] 5GHz Omni standoff i thought i was paying somewhere in the $150 range for it On Thu, Mar 10, 2016 at 7:16 PM, Chuck McCown <ch...@wbmfg.com> wrote: What do you pay for an Andrew/Comscope S200? From: Ken Hohhof Sent: Thursday, March 10, 2016 1:25 PM To: af@afmug.com Subject: Re: [AFMUG] 5GHz Omni standoff How much standoff do you need? I have used Andrew S200 like George says (2 ft standoff) or S300 (3 ft), actually they go up to 6 ft standoff. Or Connect-It Wireless S2-S6. Can be used on vertical or sloping tower legs. Sitepro1 also has several solutions, some of which are YUGE! From: Jason McKemie Sent: Thursday, March 10, 2016 2:02 PM To: af@afmug.com Subject: Re: [AFMUG] 5GHz Omni standoff I had looked at those, I just didn't know if it had enough standoff for use with an omni - from a shadowing perspective. On Thursday, March 10, 2016, Chuck McCown <ch...@wbmfg.com> wrote: Here is a good ‘un: http://www.mccowntech.com/24-inch-pipe-standoff/ From: Jason McKemie Sent: Thursday, March 10, 2016 12:00 PM To: javascript:_e(%7B%7D,'cvml','af@afmug.com'); Subject: [AFMUG] 5GHz Omni standoff Anyone have suggestions for a standoff mount for use with a 5GHz omni? It will be mounted to the side of a Pirod tower, so I'm going to need some sort of standoff to minimize shadowing. -Jason