OK, that makes a huge difference. On a mount like that my galvanizing would
cost me close to $10 alone.
From: Bill Prince
Sent: Thursday, March 10, 2016 7:27 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
Chinese steel. Otherwise known as zinc-plated lead.
bp
<part15sbs{at}gmail{dot}com>
On 3/10/2016 6:25 PM, Chuck McCown wrote:
Hmmm, that is very low. Like lower than wholesale low. I wonder how they do
it for that...
From: Ken Hohhof
Sent: Thursday, March 10, 2016 5:48 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
$78 (plus shipping) here:
http://ciwireless1-px.rtrk.com/product/tower-antenna-standoff/
From: Kurt Fankhauser
Sent: Thursday, March 10, 2016 6:31 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
i thought i was paying somewhere in the $150 range for it
On Thu, Mar 10, 2016 at 7:16 PM, Chuck McCown <ch...@wbmfg.com> wrote:
What do you pay for an Andrew/Comscope S200?
From: Ken Hohhof
Sent: Thursday, March 10, 2016 1:25 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
How much standoff do you need? I have used Andrew S200 like George says (2
ft standoff) or S300 (3 ft), actually they go up to 6 ft standoff. Or
Connect-It Wireless S2-S6. Can be used on vertical or sloping tower legs.
Sitepro1 also has several solutions, some of which are YUGE!
From: Jason McKemie
Sent: Thursday, March 10, 2016 2:02 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz Omni standoff
I had looked at those, I just didn't know if it had enough standoff for use
with an omni - from a shadowing perspective.
On Thursday, March 10, 2016, Chuck McCown <ch...@wbmfg.com> wrote:
Here is a good ‘un:
http://www.mccowntech.com/24-inch-pipe-standoff/
From: Jason McKemie
Sent: Thursday, March 10, 2016 12:00 PM
To: javascript:_e(%7B%7D,'cvml','af@afmug.com');
Subject: [AFMUG] 5GHz Omni standoff
Anyone have suggestions for a standoff mount for use with a 5GHz omni?
It will be mounted to the side of a Pirod tower, so I'm going to need some sort
of standoff to minimize shadowing.
-Jason
