Quality things can be had from China, but they cost just as much as a quality thing made elsewhere... Example being the 2', 3' and 4' microwave antennas from Shenglu. Not much price difference to Radiowaves.
On Thu, Mar 10, 2016 at 6:27 PM, Bill Prince <part15...@gmail.com> wrote: > Chinese steel. Otherwise known as zinc-plated lead. > > bp > <part15sbs{at}gmail{dot}com> > > > On 3/10/2016 6:25 PM, Chuck McCown wrote: > > Hmmm, that is very low. Like lower than wholesale low. I wonder how they > do it for that... > > *From:* Ken Hohhof <af...@kwisp.com> > *Sent:* Thursday, March 10, 2016 5:48 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] 5GHz Omni standoff > > $78 (plus shipping) here: > http://ciwireless1-px.rtrk.com/product/tower-antenna-standoff/ > > > *From:* Kurt Fankhauser <lists.wavel...@gmail.com> > *Sent:* Thursday, March 10, 2016 6:31 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] 5GHz Omni standoff > > i thought i was paying somewhere in the $150 range for it > > On Thu, Mar 10, 2016 at 7:16 PM, Chuck McCown < <ch...@wbmfg.com> > ch...@wbmfg.com> wrote: > >> What do you pay for an Andrew/Comscope S200? >> >> *From:* Ken Hohhof <af...@kwisp.com> >> *Sent:* Thursday, March 10, 2016 1:25 PM >> *To:* <af@afmug.com>af@afmug.com >> *Subject:* Re: [AFMUG] 5GHz Omni standoff >> >> How much standoff do you need? I have used Andrew S200 like George says >> (2 ft standoff) or S300 (3 ft), actually they go up to 6 ft standoff. Or >> Connect-It Wireless S2-S6. Can be used on vertical or sloping tower legs. >> Sitepro1 also has several solutions, some of which are YUGE! >> >> >> *From:* Jason McKemie <j.mcke...@veloxinetbroadband.com> >> *Sent:* Thursday, March 10, 2016 2:02 PM >> *To:* <af@afmug.com>af@afmug.com >> *Subject:* Re: [AFMUG] 5GHz Omni standoff >> >> I had looked at those, I just didn't know if it had enough standoff for >> use with an omni - from a shadowing perspective. >> >> On Thursday, March 10, 2016, Chuck McCown < <ch...@wbmfg.com> >> ch...@wbmfg.com> wrote: >> >>> Here is a good ‘un: >>> <http://www.mccowntech.com/24-inch-pipe-standoff/> >>> http://www.mccowntech.com/24-inch-pipe-standoff/ >>> >>> *From:* Jason McKemie >>> *Sent:* Thursday, March 10, 2016 12:00 PM >>> *To:* javascript:_e(%7B%7D,'cvml','af@afmug.com'); >>> *Subject:* [AFMUG] 5GHz Omni standoff >>> >>> Anyone have suggestions for a standoff mount for use with a 5GHz omni? >>> It will be mounted to the side of a Pirod tower, so I'm going to need some >>> sort of standoff to minimize shadowing. >>> >>> -Jason >>> >> > > >