What is time frame on 1u configurable sync injector?
On Sun, Mar 27, 2016 at 1:40 PM, Forrest Christian (List Account) <li...@packetflux.com> wrote: > There's already one of these on the roadmap. Unit which will sync two > radios. > > On Mar 27, 2016 11:37 AM, "George Skorup" <geo...@cbcast.com> wrote: >> >> Woulda been nice. Oh well. >> >> This I think is another good example for a UGPS-like SyncPipe. Could I >> send a climber up to take the Parasitic pipe out and then throw on a >> SyncInjector at the bottom... sure. Burning a GigE SyncInjector for a 1 AP >> site though. >> >> On 3/26/2016 6:42 PM, Forrest Christian (List Account) wrote: >> >> I wouldn't recommend this. Mainly because it's going to unbalance the >> gigabit ethernet pairs and likely cause ethernet errors as the power >> consumption changes. >> >> On Mar 26, 2016 7:15 AM, "George Skorup" <geo...@cbcast.com> wrote: >>> >>> Dumb question, probably best answered by Forrest. Say I have one of the >>> newer universal Parasitic SyncPipes. Newer meaning Rev G+. Universal meaning >>> you can use them on standard Canopy 30VDC POE and the stupid 320/430 pinout, >>> since they tap only the two power pins that don't change. OK, so now say I >>> take a GigE injector and configure a 450 AP to negotiate 1000BaseT. Will >>> GigE work... "through" the Parasitic pipe? I know the 10/100 data pairs are >>> passed straight through. Not sure about the other two pairs. Since it taps >>> only two pins for power, I doubt there's any bonding going on. >> >> >
