Nah, pulling it from the box with a modbus library... scraping the http
interface was a non-starter...
On 5/9/16 7:12 PM, Eric Kuhnke wrote:
How are you retrieving the data from the morningstar to feed into the
program? http interface?
I'm fine with using curl, sed, regex in a shell script to graph
arbitrary data from things that present more information via a
non-SNMP interface... Been doing that for a while with external
sources like weather data, I-5 traffic, etc.
On Mon, May 9, 2016 at 6:06 PM, Robert Andrews <i...@avantwireless.com
<mailto:i...@avantwireless.com>> wrote:
I actually have a few C programs that can be used to query any
values you want from a Morningstar with ethernet. I use them to
feed MRTG with the actual voltages and currents through my
Morningstars. One less piece of hardware and one less cable to
deal with and one less voltage vampire on my solar sites...
On 05/09/2016 04:38 PM, Sean Heskett wrote:
if you hook up a packetflux to the serial port than you can get
everything you could ever want to monitor via SNMP. The built
in SNMP
is pretty limited.
here's a screenshot of the packetflux web interface, all these
values
can be obtained via SNMP.
Inline image 1
On Mon, May 9, 2016 at 2:55 PM, Eric Kuhnke
<eric.kuh...@gmail.com <mailto:eric.kuh...@gmail.com>
<mailto:eric.kuh...@gmail.com <mailto:eric.kuh...@gmail.com>>>
wrote:
Any chance you could snmpwalk one starting from the root OID,
numeric, and copy/paste the results back to the mailing
list? I'm
curious what it exposes.
On Mon, May 9, 2016 at 2:22 PM, Sean Heskett
<af...@zirkel.us <mailto:af...@zirkel.us>
<mailto:af...@zirkel.us <mailto:af...@zirkel.us>>> wrote:
We use Morningstar tri-star controllers. They have a web
interface and snmp support via an Ethernet
connection. You can
also hook up to the serial port a packetflux module
designed for
the Morningstar controllers.
-Sean
On Monday, May 9, 2016, Eric Kuhnke
<eric.kuh...@gmail.com <mailto:eric.kuh...@gmail.com>
<mailto:eric.kuh...@gmail.com
<mailto:eric.kuh...@gmail.com>>> wrote:
Is there anything new on the market in the last 2
years or
so that speaks SNMP over IP and Ethernet?
Specifically I'm trying to figure out how to integrate
OpenNMS and Cacti with OIDs for integer values
like charging
amperage, input current from PV, current battery
string
voltage, etc. Temperature monitoring would be nice
too.
