Pretty graphs. Me likey. On Mon, May 9, 2016 at 10:58 PM Jesse DuPont <jesse.dup...@celeritycorp.net> wrote:
> Here's the Cacti graphs, in case its helpful. This site only has a load of > 900mA so it's done charging after less than 2 hours in the morning. > "Negative" current (red) is battery charging. This is from today, it was > partly cloudy. On the voltage chart, when the green (solar volts) goes > above the red (battery volts), the controller (which is a Morningstar PWM) > changed to battery maintenance because they're charged. > > *Jesse DuPont* > > Network Architect > email: jesse.dup...@celeritycorp.net > Celerity Networks LLC > > Celerity Broadband LLC > Like us! facebook.com/celeritynetworksllc > > Like us! facebook.com/celeritybroadband > [image: celeritynetworks-GIF.gif] > > On 5/9/16 9:36 PM, jesse.dup...@celeritycorp.net wrote: > > We wire our solar controllers through the Tycon TPDIN. We graph voltages > and current for the DC bus, batteries and solar panels separately in both > the Dude and Cacti. > > Get Outlook for Android <https://aka.ms/ghei36> > > > > On Mon, May 9, 2016 at 2:15 PM -0700, "Eric Kuhnke" <eric.kuh...@gmail.com > > wrote: > > Is there anything new on the market in the last 2 years or so that speaks >> SNMP over IP and Ethernet? >> >> Specifically I'm trying to figure out how to integrate OpenNMS and Cacti >> with OIDs for integer values like charging amperage, input current from PV, >> current battery string voltage, etc. Temperature monitoring would be nice >> too. >> >> >> >
