I just looked at mine, embarrassingly old at 6.1
On 5/12/2016 12:53 PM, Ken Hohhof wrote:
It was not there in 6.19.
*From:* Josh Luthman <mailto:[email protected]>
*Sent:* Thursday, May 12, 2016 12:50 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Mikrotik Routers and VOIP QOS
I want to say earlier than that but I don't have anything older either.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, May 12, 2016 at 1:49 PM, George Skorup <[email protected]
<mailto:[email protected]>> wrote:
I think that was added in 6.25 or so? The oldest I have on the
network is 6.27 and it's there.
On 5/12/2016 9:29 AM, Jerry Head wrote:
The Torch on my CCR does not look like that, no DSCP option at
all.....
On 5/11/2016 11:54 AM, Faisal Imtiaz wrote:
Make sure you are using the right settings in Torch....
and you can always sort on the DSCP Marks.
You should see something like in the attached picture...
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232 <tel:305%20663%205518%20x%20232>
Help-desk: (305)663-5518 <tel:%28305%29663-5518> Option 2 or
Email: [email protected] <mailto:[email protected]>
------------------------------------------------------------------------
*From: *"Andreas Wiatowski" mailto:[email protected]
*To: *[email protected] <mailto:[email protected]>
*Sent: *Wednesday, May 11, 2016 11:46:07 AM
*Subject: *Re: [AFMUG] Mikrotik Routers and VOIP QOS
I’ve been trying to see DSCP marks in torch on our CRR’s…
can’t seem to see anything in the interface. I’m going to
try a packet capture and view in Wireshark.
Thanks for your input.
Cheers,
______________________________
Andreas Wiatowski | CEO
Silo Wireless Inc.
Email [email protected] <mailto:[email protected]>
19 Sage Court
Brantford, Ontario N3R 7T4 (CANADA)
Tel +1.519.449.5656 Extension-600
<tel:%2B1.519.449.5656%C2%A0%20Extension-600>|Fax
+1.519.449.5536 <tel:%2B1.519.449.5536> |Toll Free
+1.866.727.4138 <tel:%2B1.866.727.4138>
*From:*Af [mailto:[email protected]] *On Behalf Of
*Faisal Imtiaz
*Sent:* Wednesday, May 11, 2016 10:48 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Mikrotik Routers and VOIP QOS
Andreas,
Yes, here is the logic....
PBX should mark packets correctly (RTP packets as well as
SIP signaling... for packets going towards to the CPE).
Phone CPE should mark packets correctly... (for packets
going to the PBX)
Routers typically are not constrained on their pipes, so
traffic flows well.
Unless you are using some sort of queues to restrict traffic
flow.... then you have to make sure that dscp/qos marked
traffic flows with priority.
Most radio's will respect DSCP/QoS marks and allocate
priority accordingly... (check with your radio mfg /
firmware version, config etc).
BTW you can easily see the DSCP/QoS marks if you use TORCH
on the MT, it is real time.... :)
Regards
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232 <tel:305%20663%205518%20x%20232>
Help-desk: (305)663-5518 <tel:%28305%29663-5518> Option 2 or
Email: [email protected]
<mailto:[email protected]>
------------------------------------------------------------------------
*From: *"Andreas Wiatowski" <[email protected]
<mailto:[email protected]>>
*To: *[email protected] <mailto:[email protected]>
*Sent: *Wednesday, May 11, 2016 10:17:03 AM
*Subject: *Re: [AFMUG] Mikrotik Routers and VOIP QOS
Faisal,
So the packets should still contain DSCP tags regardless
of layer2 or layer3?
Sounds like I will need to do some packet captures.
Cheers,
______________________________
Andreas Wiatowski | CEO
Silo Wireless Inc.
Email [email protected]
<mailto:[email protected]>
19 Sage Court
Brantford, Ontario N3R 7T4 (CANADA)
Tel +1.519.449.5656 <tel:%2B1.519.449.5656>
Extension-600|Fax +1.519.449.5536
<tel:%2B1.519.449.5536> |Toll Free +1.866.727.4138
<tel:%2B1.866.727.4138>
*From:*Af [mailto:[email protected]] *On Behalf Of
*Faisal Imtiaz
*Sent:* Wednesday, May 11, 2016 9:35 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Mikrotik Routers and VOIP QOS
Hi Andreas,
in our network, we handle this as follows:-
1) we make sure that the PBX is marking the packets with
the DSCP tags correctly.
2) we make sure that the phone/iad are marking the
packets with DSCP tags correctly.
3) we make sure that the Radios (AP & CPE) are using
firmware that respects the DSCP Tags, and provides them
with appropriate priority
4) we don't do anything on our routers (in our network).
if we have to, the only thing we do on the customer
router (Dmarc) is to make sure that the dscp tags are
correct.
And this works very well for us.
Regards.
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232 <tel:305%20663%205518%20x%20232>
Help-desk: (305)663-5518 <tel:%28305%29663-5518> Option
2 or Email: [email protected]
<mailto:[email protected]>
------------------------------------------------------------------------
*From: *"Andreas Wiatowski"
<[email protected]
<mailto:[email protected]>>
*To: *[email protected] <mailto:[email protected]>
*Sent: *Wednesday, May 11, 2016 1:39:36 AM
*Subject: *[AFMUG] Mikrotik Routers and VOIP QOS
Hello All!
We have about 90 sites primarily with CCR’s of
various flavours. We have yet to implement any type
of QOS for our VOIP..but we are starting to feel
some quality pain with a couple of our “ON NET”
PBX/SIP products.
I have been reading about using mangle rules to mark
connections and then packets, then setting up a
QUEUE tree in MT where the packet marks are
prioritized. We are fully routed with no layer 2 /
bridging. I’m wondering if I can accomplish the
same thing by just identifying the IP of my
Multi-Tenant PBX box and any traffic moving to and
from…and prioritizing it as 1. Secondly, do I have
to do this on every single router on my network?
OR Is it a better practice to IDENTIFY DCSP or TOS,
mark and prioritize that instead. Just looking for
the best way to unify this across my network.
Anyone have examples? Many of the examples I have
seen really relate to SOHO type situations…. We are
talking much larger here. Most of my transport is
200Mbps to 10Gbps between sites.
Cheers,
Andreas Wiatowski, CEO
Silo Wireless Inc.
519-449-5656 x-600 <tel:519-449-5656%20x-600>
