Ok, definitely in the realm of what I was planning to do. My fallback plan involved self drilling screws and a couple of things like shown below (I had hoped to avoid this):
On Fri, May 20, 2016 at 9:50 PM, <[email protected]> wrote: > We pulled the top cover off the CCR1009PC (mostly same chassis) and > drilled holes for these DIN clips. Worked out well. > > https://www.winford.com/products/dinm01.php > > Get Outlook for Android <https://aka.ms/ghei36> > > > > On Fri, May 20, 2016 at 8:43 PM -0700, "George Skorup" <[email protected]> > wrote: > > Nope. I bought a regular CRS125 (no wireless, no rack-mount) and have been >> trying to figure out a nice way to wall-mount it on the backplane of an >> enclosure without much modification. Baltic should make a case for it. >> >> On 5/20/2016 8:46 PM, Ken Hohhof wrote: >> >> So it’s not like the desktop WiFi version of RB2011 which has holes for >> screw heads in the bottom and wall mounts quite nicely? >> >> *From:* Forrest Christian (List Account) <[email protected]> >> *Sent:* Friday, May 20, 2016 5:58 PM >> *To:* af <[email protected]> >> *Subject:* Re: [AFMUG] CRS125 wall mount? >> >> Sadly, this is the one with the wifi, and as such doesn't come with >> rackmount ears. <http://routerboard.com/CRS125-24G-1S-2HnD-IN> >> http://routerboard.com/CRS125-24G-1S-2HnD-IN >> >> Holes are also conspicuously absent.... >> >> On Fri, May 20, 2016 at 4:18 PM, Sterling Jacobson < >> <[email protected]>[email protected]> wrote: >> >>> I’ve just turned the rack ears to face the bottom and screwed that into >>> the wall. >>> >>> >>> >>> I don’t know if that still works, but I’m pretty sure I’ve done that >>> with one of those 24 port CRS switches. >>> >>> They use slightly different mounts for different versions and models of >>> CRS and CCR so I’m not 100 percent on that. >>> >>> >>> >>> *From:* Af [mailto: <[email protected]>[email protected]] *On >>> Behalf Of *Bill Prince >>> *Sent:* Friday, May 20, 2016 4:14 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] CRS125 wall mount? >>> >>> >>> >>> I don't have one in front of me, but IIRC, there are holes on the sides >>> suitable for attaching mounting ears. >>> >>> bp >>> >>> <part15sbs{at}gmail{dot}com> >>> >>> >>> >>> On 5/20/2016 3:10 PM, Forrest Christian (List Account) wrote: >>> >>> Before I MacGyver something.... >>> >>> Is there a prefabricated wall mount kit/adapter for the >>> CRS125-24G-1S-2HnD-IN that someone makes that I'm not finding? >>> >>> -forrest >>> >>> >>> -- >>> >>> *Forrest Christian* *CEO, PacketFlux Technologies, Inc.* >>> >>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>> >>> <[email protected]>[email protected] | <http://www.packetflux.com> >>> http://www.packetflux.com >>> >>> <http://www.linkedin.com/in/fwchristian> >>> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >>> >>> >>> >> >> >> >> -- >> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >> <[email protected]>[email protected] | <http://www.packetflux.com/> >> http://www.packetflux.com >> <http://www.linkedin.com/in/fwchristian> >> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >> >> >> -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux>
