If heavy duty zipties had been a common thing in the 1980s when MacGyver was on the air, they'd be in nearly every episode. :-)
On Fri, May 20, 2016 at 9:07 PM, Forrest Christian (List Account) < li...@packetflux.com> wrote: > And now we're into MacGyvering it. > > On Fri, May 20, 2016 at 5:05 PM, Eric Kuhnke <eric.kuh...@gmail.com> > wrote: > >> If you're talking about sticking it to a wall such as plywood in a wiring >> closet, attach four screw-mount cable tie mounts to the plywood in a >> rectangle shape, with 3/4" self tapping wood screws, and use heavy duty 12" >> zipties to strap it down to the cable tie mounts. Would probably take 100+ >> lbs of force to pull it off the wall if done right. >> >> http://www.alliedelec.com/essentra-components-fth-5a-rt-c/70208594/ >> >> http://www.panduit.com/heiler/GroupImages/G-WASGABM25--IND1-O-MED-ENG.jpg >> >> >> >> On Fri, May 20, 2016 at 3:58 PM, Forrest Christian (List Account) < >> li...@packetflux.com> wrote: >> >>> Sadly, this is the one with the wifi, and as such doesn't come with >>> rackmount ears. http://routerboard.com/CRS125-24G-1S-2HnD-IN >>> >>> Holes are also conspicuously absent.... >>> >>> On Fri, May 20, 2016 at 4:18 PM, Sterling Jacobson <sterl...@avative.net >>> > wrote: >>> >>>> I’ve just turned the rack ears to face the bottom and screwed that into >>>> the wall. >>>> >>>> >>>> >>>> I don’t know if that still works, but I’m pretty sure I’ve done that >>>> with one of those 24 port CRS switches. >>>> >>>> They use slightly different mounts for different versions and models of >>>> CRS and CCR so I’m not 100 percent on that. >>>> >>>> >>>> >>>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Bill Prince >>>> *Sent:* Friday, May 20, 2016 4:14 PM >>>> *To:* af@afmug.com >>>> *Subject:* Re: [AFMUG] CRS125 wall mount? >>>> >>>> >>>> >>>> I don't have one in front of me, but IIRC, there are holes on the sides >>>> suitable for attaching mounting ears. >>>> >>>> bp >>>> >>>> <part15sbs{at}gmail{dot}com> >>>> >>>> >>>> >>>> On 5/20/2016 3:10 PM, Forrest Christian (List Account) wrote: >>>> >>>> Before I MacGyver something.... >>>> >>>> Is there a prefabricated wall mount kit/adapter for the >>>> CRS125-24G-1S-2HnD-IN that someone makes that I'm not finding? >>>> >>>> -forrest >>>> >>>> >>>> -- >>>> >>>> *Forrest Christian* *CEO, PacketFlux Technologies, Inc.* >>>> >>>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>>> >>>> forre...@imach.com | http://www.packetflux.com >>>> >>>> <http://www.linkedin.com/in/fwchristian> >>>> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >>>> >>>> >>>> >>> >>> >>> >>> -- >>> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>> forre...@imach.com | http://www.packetflux.com >>> <http://www.linkedin.com/in/fwchristian> >>> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >>> >>> >> > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > forre...@imach.com | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > >
