Did these make it to website somewhere yet?
On Wed, May 18, 2016 at 7:11 AM, Forrest Christian (List Account) < [email protected]> wrote: > Well, I'm sort of working on the rackmount. > > What I have powered on on the bench is the new 4 port gigabit > powerinjector+sync. I have a 450i, a 450, an airfiber24, and some random > 24v ubnt radio all powered on at the same time with straight through > cables. 2 power busses, each port individually jumperable. Firmware is > done, cases show up in a couple of weeks, and it's shipping shortly > thereafter. They should be up on the website this week for preorders. > > Once those are out, I mainly need to just reformat that same circuit into > the rackmount and 12 port form factor. > On May 17, 2016 6:46 PM, "George Skorup" <[email protected]> wrote: > >> We're going to be retrofitting some sites and installing some old Trango >> ApexPlus radios. Going to inject with GigE-POE-APC's. I was hoping to have >> remote power control capability since we're going to be building up >> completely new cabinets anyway. Not only the remote power control, but >> getting rid of the glass fuses as well. I would be fine with a single port >> injector version for the crazy -48 on all pairs, return on shield POE >> scheme with the ApexPlus/Lynx. I imagine that has the same issue as the -48 >> PDU. Oh well, I can leave them old school until you can come up with >> something. I have 14 of these things, so it'd be nice to have something >> eventually. >> >> BTW, I'll be powering these from a 48-48 RSD which is then fed from a >> Traco +48 TSP+BCM UPS. >> >> Honestly, I'd rather have the rack mount 16/18 port universal sync >> injectors right now. So if you're working on that, don't worry about this. >> :) >> >> P.S. I had an Exalt radio up and crash in a thunderstorm last week. PDU >> feeding a GigE-POE-APC. Port didn't trip, radio just quit. Went from 520ma >> utilization to about 150ma. I'm thinking soft lock. PDU saved me from an >> hour and a half drive. That's where I was going with this. I hate driving >> for hours just to power-cycle some piece of shit radio. So everywhere we >> have these goddamn Exalts is getting either a PDU or your new universal >> injector, 12 port DIN or rack mount. Gotta have it. Had another one lock up >> earlier that day, and it was on its own 802.3at brick, but it was only 5 >> minutes from my house. Still pissed me off. >> >> On 5/17/2016 7:17 PM, Forrest Christian (List Account) wrote: >> >> Just got my nose deeply into R&D for other things. >> >> The board for the PDU's was designed so we could (at least in theory) >> build a -48V version. The underlying issue with it is that it would >> require power from a base unit to power up any radios - since we need >> positive power to run the circuitry. >> >> If you really really really really want one, I guess we could build one >> in the -48V style. I'd have to look at see what parts we'd have to bring >> in to make it though. >> >> >> >> On Tue, May 17, 2016 at 5:11 PM, George Skorup <[email protected]> wrote: >> >>> Is Forrest on vacation or does he not like me anymore? :( >>> >>> >>> On 5/12/2016 1:27 PM, George Skorup wrote: >>> >>>> Hey Forrest, you mentioned a -48 version of the 5ch PDU in the past. Is >>>> this still in the works? Me want. Well, really it's a need. >>>> >>> >>> >> >> >> -- >> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >> <[email protected]>[email protected] | <http://www.packetflux.com/> >> http://www.packetflux.com >> <http://www.linkedin.com/in/fwchristian> >> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >> >> >>
