After this work on the 1u will begin?
On Wed, Jun 1, 2016 at 3:51 AM, Forrest Christian (List Account) < [email protected]> wrote: > The production boards showed up today. I haven't tested them yet to > verify 100% operation. I expect the cases in a week or so. > > When I see the first cases, we'll get pictures taken and everything up on > the web. I used to do a long pre-order but we spent so much time trying to > keep people in the loop that we just decided it wasn't worth it until we > had some in hand. > > -forrest > > > > On Tue, May 31, 2016 at 3:36 PM, Matt <[email protected]> wrote: > >> Did these make it to website somewhere yet? >> >> >> On Wed, May 18, 2016 at 7:11 AM, Forrest Christian (List Account) < >> [email protected]> wrote: >> >>> Well, I'm sort of working on the rackmount. >>> >>> What I have powered on on the bench is the new 4 port gigabit >>> powerinjector+sync. I have a 450i, a 450, an airfiber24, and some random >>> 24v ubnt radio all powered on at the same time with straight through >>> cables. 2 power busses, each port individually jumperable. Firmware is >>> done, cases show up in a couple of weeks, and it's shipping shortly >>> thereafter. They should be up on the website this week for preorders. >>> >>> Once those are out, I mainly need to just reformat that same circuit >>> into the rackmount and 12 port form factor. >>> On May 17, 2016 6:46 PM, "George Skorup" <[email protected]> wrote: >>> >>>> We're going to be retrofitting some sites and installing some old >>>> Trango ApexPlus radios. Going to inject with GigE-POE-APC's. I was hoping >>>> to have remote power control capability since we're going to be building up >>>> completely new cabinets anyway. Not only the remote power control, but >>>> getting rid of the glass fuses as well. I would be fine with a single port >>>> injector version for the crazy -48 on all pairs, return on shield POE >>>> scheme with the ApexPlus/Lynx. I imagine that has the same issue as the -48 >>>> PDU. Oh well, I can leave them old school until you can come up with >>>> something. I have 14 of these things, so it'd be nice to have something >>>> eventually. >>>> >>>> BTW, I'll be powering these from a 48-48 RSD which is then fed from a >>>> Traco +48 TSP+BCM UPS. >>>> >>>> Honestly, I'd rather have the rack mount 16/18 port universal sync >>>> injectors right now. So if you're working on that, don't worry about this. >>>> :) >>>> >>>> P.S. I had an Exalt radio up and crash in a thunderstorm last week. PDU >>>> feeding a GigE-POE-APC. Port didn't trip, radio just quit. Went from 520ma >>>> utilization to about 150ma. I'm thinking soft lock. PDU saved me from an >>>> hour and a half drive. That's where I was going with this. I hate driving >>>> for hours just to power-cycle some piece of shit radio. So everywhere we >>>> have these goddamn Exalts is getting either a PDU or your new universal >>>> injector, 12 port DIN or rack mount. Gotta have it. Had another one lock up >>>> earlier that day, and it was on its own 802.3at brick, but it was only 5 >>>> minutes from my house. Still pissed me off. >>>> >>>> On 5/17/2016 7:17 PM, Forrest Christian (List Account) wrote: >>>> >>>> Just got my nose deeply into R&D for other things. >>>> >>>> The board for the PDU's was designed so we could (at least in theory) >>>> build a -48V version. The underlying issue with it is that it would >>>> require power from a base unit to power up any radios - since we need >>>> positive power to run the circuitry. >>>> >>>> If you really really really really want one, I guess we could build one >>>> in the -48V style. I'd have to look at see what parts we'd have to bring >>>> in to make it though. >>>> >>>> >>>> >>>> On Tue, May 17, 2016 at 5:11 PM, George Skorup <[email protected]> >>>> wrote: >>>> >>>>> Is Forrest on vacation or does he not like me anymore? :( >>>>> >>>>> >>>>> On 5/12/2016 1:27 PM, George Skorup wrote: >>>>> >>>>>> Hey Forrest, you mentioned a -48 version of the 5ch PDU in the past. >>>>>> Is this still in the works? Me want. Well, really it's a need. >>>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >>>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>>> <[email protected]>[email protected] | <http://www.packetflux.com/> >>>> http://www.packetflux.com >>>> <http://www.linkedin.com/in/fwchristian> >>>> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >>>> >>>> >>>> >> > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > >
