The production boards showed up today. I haven't tested them yet to verify 100% operation. I expect the cases in a week or so.
When I see the first cases, we'll get pictures taken and everything up on the web. I used to do a long pre-order but we spent so much time trying to keep people in the loop that we just decided it wasn't worth it until we had some in hand. -forrest On Tue, May 31, 2016 at 3:36 PM, Matt <[email protected]> wrote: > Did these make it to website somewhere yet? > > > On Wed, May 18, 2016 at 7:11 AM, Forrest Christian (List Account) < > [email protected]> wrote: > >> Well, I'm sort of working on the rackmount. >> >> What I have powered on on the bench is the new 4 port gigabit >> powerinjector+sync. I have a 450i, a 450, an airfiber24, and some random >> 24v ubnt radio all powered on at the same time with straight through >> cables. 2 power busses, each port individually jumperable. Firmware is >> done, cases show up in a couple of weeks, and it's shipping shortly >> thereafter. They should be up on the website this week for preorders. >> >> Once those are out, I mainly need to just reformat that same circuit >> into the rackmount and 12 port form factor. >> On May 17, 2016 6:46 PM, "George Skorup" <[email protected]> wrote: >> >>> We're going to be retrofitting some sites and installing some old Trango >>> ApexPlus radios. Going to inject with GigE-POE-APC's. I was hoping to have >>> remote power control capability since we're going to be building up >>> completely new cabinets anyway. Not only the remote power control, but >>> getting rid of the glass fuses as well. I would be fine with a single port >>> injector version for the crazy -48 on all pairs, return on shield POE >>> scheme with the ApexPlus/Lynx. I imagine that has the same issue as the -48 >>> PDU. Oh well, I can leave them old school until you can come up with >>> something. I have 14 of these things, so it'd be nice to have something >>> eventually. >>> >>> BTW, I'll be powering these from a 48-48 RSD which is then fed from a >>> Traco +48 TSP+BCM UPS. >>> >>> Honestly, I'd rather have the rack mount 16/18 port universal sync >>> injectors right now. So if you're working on that, don't worry about this. >>> :) >>> >>> P.S. I had an Exalt radio up and crash in a thunderstorm last week. PDU >>> feeding a GigE-POE-APC. Port didn't trip, radio just quit. Went from 520ma >>> utilization to about 150ma. I'm thinking soft lock. PDU saved me from an >>> hour and a half drive. That's where I was going with this. I hate driving >>> for hours just to power-cycle some piece of shit radio. So everywhere we >>> have these goddamn Exalts is getting either a PDU or your new universal >>> injector, 12 port DIN or rack mount. Gotta have it. Had another one lock up >>> earlier that day, and it was on its own 802.3at brick, but it was only 5 >>> minutes from my house. Still pissed me off. >>> >>> On 5/17/2016 7:17 PM, Forrest Christian (List Account) wrote: >>> >>> Just got my nose deeply into R&D for other things. >>> >>> The board for the PDU's was designed so we could (at least in theory) >>> build a -48V version. The underlying issue with it is that it would >>> require power from a base unit to power up any radios - since we need >>> positive power to run the circuitry. >>> >>> If you really really really really want one, I guess we could build one >>> in the -48V style. I'd have to look at see what parts we'd have to bring >>> in to make it though. >>> >>> >>> >>> On Tue, May 17, 2016 at 5:11 PM, George Skorup <[email protected]> >>> wrote: >>> >>>> Is Forrest on vacation or does he not like me anymore? :( >>>> >>>> >>>> On 5/12/2016 1:27 PM, George Skorup wrote: >>>> >>>>> Hey Forrest, you mentioned a -48 version of the 5ch PDU in the past. >>>>> Is this still in the works? Me want. Well, really it's a need. >>>>> >>>> >>>> >>> >>> >>> -- >>> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>> <[email protected]>[email protected] | <http://www.packetflux.com/> >>> http://www.packetflux.com >>> <http://www.linkedin.com/in/fwchristian> >>> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >>> >>> >>> > -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux>
