Huh? Er x SFP is gig. Fiber-POE is gig. On Jun 3, 2016 5:36 PM, "Sterling Jacobson" <[email protected]> wrote:
> Not for 1000Mbps. > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds > Sent: Friday, June 3, 2016 4:33 PM > To: [email protected] > Subject: Re: [AFMUG] SwOS FYI > > If you just need a media converter, either a Ubiquiti Fiber-POE (minus the > POE part), or MikroTik media converter would probably be fine. In addition > to the 260GS, the EdgeRouter X SFP can also have all ports put in switch > mode, and seems to work fine with generics and juniper coded SFP modules. > > On Fri, Jun 3, 2016 at 5:16 PM, Colin Stanners <[email protected]> > wrote: > > Have you seen any other SFP issues with the RB260GS? I remember > > Sterling said that very rarely there were some units that, after > > fluctuations in the power source, didn't detect the SFP unless they > > were rebooted or the SFP was reinserted. > > > > I'm trying to get an idea of their reliability for use as media > converters. > > > > On Jun 3, 2016 4:31 PM, "Jason McKemie" > > <[email protected]> > > wrote: > > > > I received a new batch of RB260GS units and after a lot of > > troubleshooting at an install that showed the local SFP interface as > > being up, but the remote as down I noticed that they were loaded with > > the 1.15 firmware. After downgrading to 1.13 the link came right up. > > The change log shows SwOS 1.16 having a fix for the SFP port getting > > disabled in certain situations, but mine showed as up, so I'm not sure > > that is the problem I'm seeing. I didn't have 1.16 on my laptop to test. >
